Identify If some One Can - B&M Short Shift - Thanks

[northy]

when I was testing short throw gear levers, I did try one with the shorter arm in and the gear change was like a switch. MEGA short throw.

I took the arm off and just ended up using the lever on its own.

I would recommend you do the same.

[AND2386]

So Ya I have already replaced the leaver, that's the new one fitted in the picture and ya it was a nightmare to fit. The Rubber ring stops the ball joint rubbing against the metal, it's not just a housing to pretect the joint. So it will be a nightmare to try and use that on the new arm, but the new arms loos in the outer joint where the rubber is ment to be, problem is not enough mm room to put the rubber ring in as well.
Thanks though for the info so far.
Any one got pictures of there set up?

[northy]

MB Performance (not eBay copy)



B&M

[AND2386]

It's the New Link pics I'm after, Thanks though

[northy]

I really wouldn't bother with it AND2386.

[AND2386]

I've already got the Link in, but Thanks