Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1

    Valver/williams track car bits

    Got a 1.8 16v valver track car that i bought to use as a cheap track day car but decided to break it as i could do with the money to be honest and i dont think ill use it as much as i should.

    Complete F7P 1.8 16v engine with gearbox. Ive not driven the car far (500/600 metres) but it idles fine and theres no nasty whines, knocks, bangs etc etc, pulls strong aswell. Also got a k and n cone filter which ill leave on. Wanting £200?

    Loom and ecu to go with above engine. £100

    6 point bolt in cage woth door bars and X rear brace, no harness bar tho. Im unsure of the make but its a good strong sturdy cage. Id like offers around the £400 mark.

    Sode poly window kit. Tbh this isnt perfext, the windows are scratched quite badly on the drivers side, passenger side is in better condition but still scratched abit. Only the drivers window has a small slider. £50?

    Renault turbine wheels with virtually new yoko a539 195 50 15 tyres. The wheels are all true and straight and the tyres hold air and look almost brand spanking new. Centre caps are missing tho unfortunately. £350

    Also got spax shocks all round with what i beleive to be 50mm springs on them. The front sits pretty dam low. £250?

    Plumbed in fire extinguisher with 2 pull handles. The 2 nozzles are currently in the engine bay so theres enough tube for that, has 1 pull handle on the cage in easy reach of the driver and 1 outside on the scuttle panel. Extinguisher is still in the green but i cant remember if its in date/what the date is on it. £100?

    Also got a lowered rear beam. £40?

    Rear "CLIO 1.8 16V" stripe that sits on the boot lid. The grey plastic has faded abit but still in good condition. £30?

    Williams front bumper in blue. Missing fog lights. £20

    The shell is solid, no rust on it anywhere. Its a K plate. Been painted in red oxide primer. Gotta be worth £50 to someone?

    Anything else, just let me know. Ill try get pictures up if i can.

    Items are in BANBURY at the minute, but im hoping to move it to near oxford services of the m40 (junction 8a). Most of it will need to be collected, can post the smaller items tho.

    Cheers

  2. #2
    Forum User
    Join Date
    Aug 2009
    Location
    West Hants
    Posts
    477
    Hi Nick,

    Got any pics of the cage please,

    Cheers,
    Simon

  3. #3
    Any sunroof related items?

  4. #4
    How do i put pictures up on here? Or drop me a pm with your e-mail and ill send u some across

    Yes the car has a sunroof garley

  5. #5
    Follow the instructions on this thread for posting pics....

    Regards Ian

    http://williamsclio.co.uk/forum/show...?44592-Attempt

  6. #6
    Forum User
    Join Date
    Jan 2013
    Location
    Formally Bootstrap
    Posts
    169
    I'd have the bumper if all intact, not worried about paint - but I'm in Portsmouth. Let me know if you change your mind about courier, or if I am up your way I'll be in contact.

  7. #7
    If u sort it all then i could probably get it sent, but would rather it be collected tbh

  8. #8
    Sent you a PM regarding speedo clocks.

    Cheers

  9. #9
    Forum User
    Join Date
    Jan 2013
    Location
    Formally Bootstrap
    Posts
    169
    I should be Oxford way on Sat Sep 5th - going to Combe for the 750MC race meet. Any chance you'd be around in the evening on my way back?

  10. #10
    Yes i should be around. Drop me a pm and we can sort something out


 

Similar Threads

  1. track car - 1.4rt/valver base car
    By thane in forum Mechanical
    Replies: 3
    Last Post: 17-11-2007, 19:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •