Do you have a passenger grab handle and the top screw from the handle on the door?
Do you have a passenger grab handle and the top screw from the handle on the door?
Inlet manifold with throttle body
Downpipe with lambda,
PS rack
16v clocks
449 16v passenger side wing with ph1 16v badges and repeaters,
449 16v drivers side wing with ph1 16v badges and repeaters,
I will take them bits mate van pick up next week
Need the stiffness support which connect the dogbone with engine oil sump.
It's the item with the red arrow on this photo.
http://www.clio-williams.net/Parties...teur/6_00a.jpg
and the black bracket from a Clio Williams that goes under the gearbox upper mount.
It's the 3rd photo.
http://williamsclio.co.uk/forum/show...e-jc5-gear-box
I will pay £100 if anyone can find the stiffness support and the bracket reinforcement.
If you contact Mat Brown via his Facebook page he should have what you need.
Regards Ian
Try this...
https://m.facebook.com/Clio-Specialist-843705932412754/
Regards Ian
Thank you very much Ian.