'Curling' roof trims - replacements?

[andreas395]

I think I will try that, the challenge with any type of adhesive it holding the trim down long enough for it to cure/set.

Use some masking tape mate

[Frimley111R]

I will give it a go but it needs to be very sticky to hold the edges down.

[16v_paddy]

Did you get a free car with them too?

Not quite but yeah, only went to buy some roof trims then ended up buying a car as well

[Frimley111R]

Thought - a glue gun may do it as it dries very quickly.

[pvsmark]

You can still get replacement roof trim clips, they sorted mine out a treat

[Frimley111R]

Is that why they are lifting? I didn't spot anything underneath the trim.

[pvsmark]

Yeah there are plastic clips that fix under the trim and then clip onto the small lumps in the recess, here are the ones i used: http://www.ebay.co.uk/itm/like/25141...f14=108&ff19=0

[Frimley111R]

Yeah there are plastic clips that fix under the trim and then clip onto the small lumps in the recess, here are the ones i used: http://www.ebay.co.uk/itm/like/25141...f14=108&ff19=0

Right, thanks. So would mine just have broken or would the strips simply have come unclipped?

[pvsmark]

Mine had become brittle over time so weren't holding for long, they may have just come unclipped over time but after a few pushes back down they deform and dont hold the trim down.

[Frimley111R]

Thanks, very helpful