1.8 16v or Williams T25/T28 turbo downpipe

[dimma]

I'm gona heat it near the turbo and pull it toward the front of the car.

[paush]

How strange?! Do you have any pics mate I'm well curious why you are having these problems

[dimma]

I can take some but won't be for a day or 2

[bass_direct]

Get some pics of your setup, seems strange

[dimma]

I will mate it's just i haven't had the chance to get to it to take pictures.its the bb tuning log manifold and the turbo exhaust housing is from a nissan 200sx t28 turbo.

[bass_direct]

It should fit with that setup. Will await pics tho

[Coops]

as above, that's pretty standard setup and to be out by 2 inches is fappin miles so somethings amiss

[dimma]

What could be wrong? It's a mark 1 Clio with all mk1 bits.everything screws onto the car no problem until I went to fit this downpipe.

[dimma]

[dimma]

this is with the dongbone disconected and ive also pressed the pipe in abit and cut the edge off the steering rack housing but the dogbone mount is still an inch away from lining up.the flange on the turbo side isnt right either ive had to drill out the bolt holes and the top right hand hole is half a hole out of line.