Engine mounts

[Cuprafenix]

I seem to have a broken engine mount, do you recommend powerflex ones?

Also saw that people put the 19 16v engine mount? Wich one is it?

Regards

[16v_paddy]

If you're on about the dogbone mount, then yes powerflex bushes are a cost effective solution.

As for the R19 mount, it's more commonly referred to as the 4th mount, it's the same as fitted to a 172 & consists of a bracket that bolts to the gearbox and a rubber that bolts to the bracket and the subframe. They're a direct fit & require no modifications

[Cuprafenix]

Thanks mate.

I'm new in the Williams scene.

Just materialized my dream last week. loool

[MatBrown]

. They're a direct fit & require no modifications

Not if your running the Williams gearbox strap. This needs trimming.

[stevie_b]

If it helps, here is what the R19 "4th mount" looks like when fitted to the subframe:

[manxseven]

Is that a bottom strut brace?
Still available ... probably not!

[stevie_b]

Yes, that's a lower strut brace. I'm not sure if they are still available - I can tell from the photo that it was taken on my old driveway and since I moved over 4 years ago I would think I must have bought it about 5 years ago!

[long~bar]

I ripped my lower brace off my subframe once.... Subframe was fooked but brace ok