Hi guys!
Soo, over the winter I installed a Gr.A scuttle induction kit on my valver and I`m having problems with vibrating scuttle panel since then. The vibrations, probably caused by some resonance, are around 3-4k rpm. I tried a lot off rubber and foam material, but the vibrations are still there. If I put the scuttle panel off, everythnik is OK, so the problem is in the panel. How do you deal with the problem? How and where to fix the panel, to stay still and not vibrate?
This is how it sounds:
The problem is only when the secondary throttle plate is opened, when not, the vibrations are not present. Any ideas?
Thanks!