Got a new car to keep the williams 1 company, an oldskool friend :)

[Dan-valver]

Really liking the turbines on this!

'There's more to life with Renault' sticker is awesome too!!

[andreas395]

Outstanding work Andreas, I applaud how you do all the work yourself, wish I had half your knowledge!

Cheers mate

[martynp]

Hi where did you get your sticker made for your Renault badge?? I need 1 as well . Your 5 looks stunning mate that's the best colour 5

[Jamie.]

Lovely.

[mopa]

awesome

[andreas395]

cheers

time to update

got a few more bits of bling for the 5 plus spent a good hour with the dremil polishing my oil breather pot





not perfect but a lot better first time i have ever polished anything to tell the truth





got some original rear badges only going to use the renault part as my gt turbo bit looks ok



rear exhaust surround as the previous owner had made a cut in the rear bumper and i always hated it so this hides it well
also got a some bling for top of radiator









Changed breather pot and put my ninja cap on with my new elf sticker







Some bling for top of rad





Changed my heater knob as it broke on me a few months ago







Also changed the passenger side seat belt so there both new now





Put my stickers on the car plus put my chrome surround on, hides where the bumper was cut in the past even though I had to cut it a bit more to fit. I'm happy with it so all good













Took my moulded badges off and replaced with originals

Old



new





Then I noticed I had a some play in my steering, drivers wheel with a slight knocking. First I thought wheel bearing but turned out to be the drivers side track rod and the ends could do with changing to.
Got the bits from gsf










new








tracking all done and taxed


Got myself a dump valve for £50 new the other day so thought I would fit it
Had to change my silicone hose for one to fit the valve lucky I had a spare which came with my intercooler

[andreas395]

Fitted some badges to my floor matts









Checked my camber as I never have since putting my phase 2 set up on, was just a quick check should of taken off my centre caps really.
Both are at just over 1 neg camber and does handle better then it did with this set up



got a new boost controller , some new washers as I had a slight leak from my rocket cover plus changed my sump plug washer to a copper one also with an oil change plus managed to do 1 door card with some bigger speakers fitted with adapters








all fitted and set up to 15psi



















the other door card and speaker fitted also cleaned the car inside and gave it wax to

[andreas395]

took the car up to Dynodaze rolling road at hinckley
I made 133bhp and 154 torque at 15 psi of my little t2.
I done 240 miles yesterday as i drove to London last night to everything running sweet as a nut pulls nicely no overheating issues just i think i need to do a rear wheel bearing but that's it

here are some pictures

[Chris197F1]

Its an absolute credit to you mate, such a stunning car

[jamiecrookston83]

so so so so so so so so jealous...