Results 1 to 6 of 6
  1. #1
    Forum User
    Join Date
    Jan 2010
    Location
    Essex
    Posts
    655

    Breaking My Track Car (With Pics)

    UPDATE 11/07/2013

    Right the time has come to break my track car:

    This car has MK1, MK2 and MK3 parts


    I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.


    The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
    The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
    All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
    £350

    Link to shell thread

    http://www.clio16valver.co.uk/forum/...p?f=12&t=53867

    The engine is a MK1 2.0 F7R Williams Engine. The mileage of the engine is approximately 72500 (have original Williams dials and documentation to prove mileage).
    At 71 257 miles the following was done to the engine prior to me fitting it in the car.
    Replace Cambelt and Tensioners, Water Pump, Thermostat, Spark Plugs, HT Leads, Rotary Arm, Distributor Cap, Engine Oil and Filter, Gearbox Oil,
    This engine is in very good condition for its age and does not burn a lot of oil. It is a strong engine and made 171.1 hp with a custom 172 manifold and the standard Williams ECU and then 177.2hp with a chipped ecu. This engine does pull like a train and considering it is not cammed the potential is definitely there!
    Parts included.
    Complete Engine Minus – Gearbox, clutch, manifold, non pas bracket, water hoses, coolant bottle.
    Including All Sensors, spark plug, ht leads, water pump, thermostat, rotary arm, distributor cap, Chipped ECU. PROV SOLD DEPOSIT TAKEN


    Throttle Body Adaptors.
    1 the worst one I made but still does the job. £25
    [img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/616.jpg[/img]

    1 The one that I made on the recent batch I made £35
    [img]http://i1041.photobucket.com/albums/b414/Hybrid_Squeak/50A3C9A9-BDAB-4EA4-B4A9-692F8788343E-1121-00000105916EAB99.jpg[/img]

    1 That I made that is probably the best flowing £45
    No picture as yet

    Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45

    Custom 172 Manifold made to fit an F7P / F7R £120 Fits in a MK2 shell never tested to see if it fits MK1 Shell
    [img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/533.jpg[/img]
    [img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/534.jpg[/img]
    [img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/535.jpg[/img]
    [img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/536.jpg[/img]
    [img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/537.jpg[/img]


    K-tec Decat (Twin Lambda) £100
    Genuine Renault manifold to cat fitting it (£30 Renault) £15

    Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 rpm £100

    Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100

    Lockable Aerocatches PROVISIONALLY SOLD DEPOSIT TAKEN
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/Aerocatrches_zpsd266d859.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Aerocatrches_zpsd266d859.jpg[/IMG][/URL]

    172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/M1155Pads_zps949984f5.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/M1155Pads_zps949984f5.jpg[/IMG][/URL]

    172 Hubs £50 the pair (good Bearings)
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/hubs_zps0a55dc3d.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/hubs_zps0a55dc3d.jpg[/IMG][/URL]
    172 Shafts £100 the pair
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/offsidedriveshaft_zps8acc8a03.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/offsidedriveshaft_zps8acc8a03.jpg[/IMG][/URL]

    172 Front Callipers £20 each
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/calipers1_zpsa772d835.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers1_zpsa772d835.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/calipers_zps41e8b8cb.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers_zps41e8b8cb.jpg[/IMG][/URL]
    172 Polybushed ARB £50

    Polybushed Exhaust Mounts £20 Inclues middle one (not pictured yet)
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/powerflexrearexhausthanger_zps0d4fb076.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/powerflexrearexhausthanger_zps0d4fb076.jpg[/IMG][/URL]

  2. #2
    Forum User
    Join Date
    Jan 2010
    Location
    Essex
    Posts
    655
    Poly Carb Windows made by ACW Plastics! Fronts with sliders 4 small holes. (Few marks from sliding back and forth). Rears with 2 holes each side for pop out vents to let air in. Black boarder kit (Started to do will need finishing) PROVISIONALLY SOLD DEPOSIT TAKEN
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/1_zps1799068d.jpeg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/1_zps1799068d.jpeg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/2_zps09e0f72e.jpeg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/2_zps09e0f72e.jpeg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/3_zps54cb011b.jpeg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/3_zps54cb011b.jpeg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/4_zpse5f329b3.jpeg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/4_zpse5f329b3.jpeg[/IMG][/URL]
    Picture shows all the nuts bolts and washers needed to fit the windows. The padding to go between the shell and the rear windows. The black border paint. One has been done (may need touching up and cleaning up depending how fussy you are) and the other one will need doing. Also pictured is the 4 pop out vents for the rear windows (extra ventilation)
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/6_zps350fef60.jpeg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/6_zps350fef60.jpeg[/IMG][/URL]

    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/5_zpsea2952b3.jpeg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/5_zpsea2952b3.jpeg[/IMG][/URL]

    T7 Lightweight heater and ducting. Everything needed to fit £110
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/heater_zps7259f842.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/heater_zps7259f842.jpg[/IMG][/URL]

    Oz Supperleggras 15” 4 x 100 ET 37. 4 Used Toyo R888’s perfect for track (don’t think they are road legal). 2 wheels are in good condition and the other two have marks. Perfect for a set of track wheels as these are ultra light weight! Also come with Genuine Oz Spigot Rings to fit the clio centre bore (whatever it is).PROVISIONALLY SOLD DEPOSIT TAKEN
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/1_zps5f964341.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/1_zps5f964341.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/2_zps60a5832f.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/2_zps60a5832f.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/3_zpsa0de7141.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/3_zpsa0de7141.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/4_zpsb5c6f3b9.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/4_zpsb5c6f3b9.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/8_zpsa0cc4dd4.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/8_zpsa0cc4dd4.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/6_zps9cdfc4b3.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/6_zps9cdfc4b3.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/5_zps0d906591.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/5_zps0d906591.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/7_zps7d600754.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/7_zps7d600754.jpg[/IMG][/URL]

    16 of these. M12 x 1.5 70mm long. £6.59 each
    http://www.demon-tweeks.co.uk/motors...onversion-stud

    16 of these. M12 x 1.5 60 degree taper 19mm head 27mm long. £6.43 each
    http://www.demon-tweeks.co.uk/motors...open-wheel-nut

    Looking for £105 delivered.

    Black TRS Tow Strap x 2 £10 posted (Each)

    Phase 1 Gear Stick £25
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/gearstick_zps90ba6708.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/gearstick_zps90ba6708.jpg[/IMG][/URL]

    Drilled and Grooved Front and Rear Discs (rears have good bearings) Inc Mintex Pads for the Front & Rear £100
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/frontdisk1_zps6550b69c.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk1_zps6550b69c.jpg[/IMG][/URL]
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/frontdisk2_zpse0cfa64f.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk2_zpse0cfa64f.jpg[/IMG][/URL]
    Will get pics of rear discs soon

    Mocal 13 Row oil Cooler – Thermostatic inc anti vibration bolts (Prevents cooler cracking) £135 Posted

    Manual steering conversion. Column and rack. Rack has 172 arms and track rod ends £80
    172 Braided Brake Lines – 3 in used condition the 4th one that is not pictured is brand new and has never been used £40 Posted
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/Brakelines_zps6ce2ebe9.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Brakelines_zps6ce2ebe9.jpg[/IMG][/URL]

    Clio Williams Dogbone Stabiliser (Goes from dogbone mount to gearbox) £20
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/williamsstabiliser_zps004e3c40.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/williamsstabiliser_zps004e3c40.jpg[/IMG][/URL]

    Fire Extinguisher (dont think I can post) £20
    [URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/fireextinguisher_zps8d9adc39.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/fireextinguisher_zps8d9adc39.jpg[/IMG][/URL]

    ​ More parts to come just need to remember them and look through the garage

  3. #3
    Forum User
    Join Date
    Jan 2010
    Location
    Essex
    Posts
    655
    Oz Ultraleggras sold
    Polycarbonate Windows sold
    Aerocatches Sold
    ​Phase 1 Gearstick sold

  4. #4
    Forum User
    Join Date
    Jan 2010
    Location
    Essex
    Posts
    655
    UPDATE 15/07/2013

    Right the time has come to break my track car:

    This car has MK1, MK2 and MK3 parts


    I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.


    The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
    The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
    All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
    £350

    Link to shell thread

    http://www.clio16valver.co.uk/forum/...p?f=12&t=53867

    Throttle Body Adaptors.
    1 the worst one I made but still does the job. £25


    1 The one that I made on the recent batch I made £35


    1 That I made that is probably the best flowing £45
    No picture as yet

    Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45

    Custom 172 Manifold made to fit an F7P / F7R £120 Fits in a MK2 shell never tested to see if it fits MK1 Shell






    K-tec Decat (Twin Lambda) £100
    Genuine Renault manifold to cat fitting it (£30 Renault) £15

    Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 rpm £100

    Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100
    http://s1149.photobucket.com/user/Hy...076a8.jpg.html

    172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted


    172 Hubs £50 the pair (good Bearings)

    172 Shafts £100 the pair


    172 Front Callipers £20 each


    172 Polybushed ARB £50
    http://s1149.photobucket.com/user/Hy...3d22d.jpg.html

    Polybushed Exhaust Mounts £20

    Middle Powerflex exhaust bracket
    http://s1149.photobucket.com/user/Hy...e7915.jpg.html

    T7 Lightweight heater and ducting. Everything needed to fit £110


    16 of these. M12 x 1.5 70mm long. £6.59 each
    http://www.demon-tweeks.co.uk/motors...onversion-stud

    16 of these. M12 x 1.5 60 degree taper 19mm head 27mm long. £6.43 each
    http://www.demon-tweeks.co.uk/motors...open-wheel-nut

    Looking for £105 delivered.

    Black TRS Tow Strap x 2 £10 posted (Each)

    Drilled and Grooved Front and Rear Discs (rears have good bearings) Inc Mintex Pads for the Front & Rear £100


    Will get pics of rear discs soon

    Mocal 13 Row oil Cooler – Thermostatic inc anti vibration bolts (Prevents cooler cracking) £135 Posted

    Manual steering conversion. Column and rack. Rack has 172 arms and track rod ends £80
    http://s1149.photobucket.com/user/Hy...3d22d.jpg.html

    172 Braided Brake Lines – 3 in used condition the 4th one that is not pictured is brand new and has never been used £40 Posted


    Clio Williams Dogbone Stabiliser (Goes from dogbone mount to gearbox) £20


    Fire Extinguisher (dont think I can post) £20


    MK2 PH1 Headlights £40 pair
    http://s1149.photobucket.com/user/Hy...d08bd.jpg.html

    F7P/F7R Starter Motor Heatshield £15
    http://s1149.photobucket.com/user/Hy...8bd49.jpg.html

    Manual Steering Conversion This was run on an F7R but I believe it will fit an F4R £50
    http://s1149.photobucket.com/user/Hy...d5b97.jpg.html

    Alternator to suit manual steering conversion £50
    http://s1149.photobucket.com/user/Hy...67fc4.jpg.html

    F7P/F7R Non Water Cooled Set Up £25
    http://s1149.photobucket.com/user/Hy...87cef.jpg.html

    More parts to come just need to remember them and look through the garage

  5. #5
    Forum User
    Join Date
    Jan 2010
    Location
    Essex
    Posts
    655
    T7 Heater SOLD!

  6. #6
    Do you still have the dogbone stabilizer?.

    Nick


 

Similar Threads

  1. Breaking Track Car - Lots of Goodies
    By Squeak in forum Items for Sale
    Replies: 18
    Last Post: 09-07-2013, 09:22
  2. Breaking Hybrid Track Car
    By scratabout1988 in forum Cars for breaking
    Replies: 9
    Last Post: 22-03-2012, 20:56
  3. Replies: 1
    Last Post: 12-08-2011, 01:07
  4. Clearing out for good... breaking track car project
    By Winston in forum Items for Sale
    Replies: 14
    Last Post: 30-08-2009, 22:02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •