UPDATE 11/07/2013

Right the time has come to break my track car:

This car has MK1, MK2 and MK3 parts


I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.


The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
£350

Link to shell thread

http://www.clio16valver.co.uk/forum/...p?f=12&t=53867

The engine is a MK1 2.0 F7R Williams Engine. The mileage of the engine is approximately 72500 (have original Williams dials and documentation to prove mileage).
At 71 257 miles the following was done to the engine prior to me fitting it in the car.
Replace Cambelt and Tensioners, Water Pump, Thermostat, Spark Plugs, HT Leads, Rotary Arm, Distributor Cap, Engine Oil and Filter, Gearbox Oil,
This engine is in very good condition for its age and does not burn a lot of oil. It is a strong engine and made 171.1 hp with a custom 172 manifold and the standard Williams ECU and then 177.2hp with a chipped ecu. This engine does pull like a train and considering it is not cammed the potential is definitely there!
Parts included.
Complete Engine Minus – Gearbox, clutch, manifold, non pas bracket, water hoses, coolant bottle.
Including All Sensors, spark plug, ht leads, water pump, thermostat, rotary arm, distributor cap, Chipped ECU. PROV SOLD DEPOSIT TAKEN


Throttle Body Adaptors.
1 the worst one I made but still does the job. £25
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/616.jpg[/img]

1 The one that I made on the recent batch I made £35
[img]http://i1041.photobucket.com/albums/b414/Hybrid_Squeak/50A3C9A9-BDAB-4EA4-B4A9-692F8788343E-1121-00000105916EAB99.jpg[/img]

1 That I made that is probably the best flowing £45
No picture as yet

Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45

Custom 172 Manifold made to fit an F7P / F7R £120 Fits in a MK2 shell never tested to see if it fits MK1 Shell
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/533.jpg[/img]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/534.jpg[/img]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/535.jpg[/img]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/536.jpg[/img]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/537.jpg[/img]


K-tec Decat (Twin Lambda) £100
Genuine Renault manifold to cat fitting it (£30 Renault) £15

Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 rpm £100

Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100

Lockable Aerocatches PROVISIONALLY SOLD DEPOSIT TAKEN
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/Aerocatrches_zpsd266d859.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Aerocatrches_zpsd266d859.jpg[/IMG][/URL]

172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/M1155Pads_zps949984f5.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/M1155Pads_zps949984f5.jpg[/IMG][/URL]

172 Hubs £50 the pair (good Bearings)
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/hubs_zps0a55dc3d.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/hubs_zps0a55dc3d.jpg[/IMG][/URL]
172 Shafts £100 the pair
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/offsidedriveshaft_zps8acc8a03.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/offsidedriveshaft_zps8acc8a03.jpg[/IMG][/URL]

172 Front Callipers £20 each
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/calipers1_zpsa772d835.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers1_zpsa772d835.jpg[/IMG][/URL]
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/calipers_zps41e8b8cb.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers_zps41e8b8cb.jpg[/IMG][/URL]
172 Polybushed ARB £50

Polybushed Exhaust Mounts £20 Inclues middle one (not pictured yet)
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/powerflexrearexhausthanger_zps0d4fb076.jpg.html][IMG]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/powerflexrearexhausthanger_zps0d4fb076.jpg[/IMG][/URL]