Breaking Track Car - Lots of Goodies

[Squeak]

hi im after a TB adaptor have you got a pic?

have you got any willy cams for sale? thanks

(yer i didnt read the full post )

Sorry mate willy cams going with the engine. Also throttle body pictures are here. The first pictures is the cheaper one and then the last pictures are the middle priced one and the last picture is the one I made which is better flowing. currently no picture for that.

Hi I am after a few bits if you have them:




door solenoid for passenger door (i assume either will fit),
the plastic cover that fits on the rear wiper arm to hide the nut,
the smoked plastic cover that sits on the roof near the interior lights,
Both door trays (what condition are the ones you have)
scuttle pannel as well if you have 1




Thanks




Ste

Bit of a long shot, do you have an oil quantity guage that works?

Cheers,
Baz

[Squeak]

because I can no longer edit the above post was meant to be

hi im after a TB adaptor have you got a pic?

have you got any willy cams for sale? thanks

(yer i didnt read the full post [IMG]file:///C:/Users/DSAUND~1/AppData/Local/Temp/msohtmlclip1/01/clip_image001.gif[/IMG])

Sorry mate willy cams going with the engine. Also throttle body pictures are here. The first pictures is the cheaper one and then the last pictures are the middle priced one and the last picture is the one I made which is better flowing. currently no picture for that.

Hi I am after a few bits if you have them:

door solenoid for passenger door (i assume either will fit),
the plastic cover that fits on the rear wiper arm to hide the nut,
the smoked plastic cover that sits on the roof near the interior lights,
Both door trays (what condition are the ones you have)
scuttle pannel as well if you have 1

Thanks

Ste

Hi mate sorry I should have put that the shell is a mk2 ph1 shell and not a mk1 shell.

Bit of a long shot, do you have an oil quantity guage that works?

Cheers,
Baz

I do have the williams aux dials but I will not be splitting them from the main oil dials.


Thanks Dan

[jock]

That's not my fault mate. I responded and you were the second person to contact me about them anyway. if you feel that so be it but please get off my thread and stop whining All the best

Mate if I was going to whine I'd have sent you a snotty pm long ago; but as you bring it up I was surprised as you pmd me at 7:30 saying send £15 deposit and you would hold them for me and another at 9:16 to say you sold em to someone else!

If I was not the first why were you offering them to me anyway? I aint bothered as 2 were delivered here this morning. Have a nice day x

[Squeak]

Mate if I was going to whine I'd have sent you a snotty pm long ago; but as you bring it up I was surprised as you pmd me at 7:30 saying send £15 deposit and you would hold them for me and another at 9:16 to say you sold em to someone else!

If I was not the first why were you offering them to me anyway? I aint bothered as 2 were delivered here this morning. Have a nice day x [IMG]file:///C:/Users/DSAUND~1/AppData/Local/Temp/msohtmlclip1/01/clip_image001.gif[/IMG]

Good I'm glad you got some in the end and the first pm I had was from someone from Spain. He had only enquired and I didn’t expect a response as I said postage would be a lot and it would not be worthwhile for him. You messaged me back and as you are in I thought it would be an easier transaction. The guy from Spain did in fact message me back. First come first serve. No offence but I hae had a lot of people saying yeah ill have them blah blah blah. Mainly timewasters (not saying youare).Any this is irrelvant as mine are now sold and you now have a set so we both happy

[Squeak]

Edit: the front springs are in fact 350lb.

172 fitment Gaz Coilovers GHA Inc AST Top Mounts (Less than 1500 miles) 350lb front 350lb Springs Rear £450

[Squeak]

Coilovers, AST's and Camber Bolts Sold!

[Squeak]

Right the time has come to break my track car:


This car has MK1, MK2 and MK3 parts




I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.




The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
£OFFERS




The engine is a MK1 2.0 F7R Williams Engine. The mileage of the engine is approximately 72500 (have original Williams dials and documentation to prove mileage).
At 71 257 miles the following was done to the engine prior to me fitting it in the car.
Replace Cambelt and Tensioners, Water Pump, Thermostat, Spark Plugs, HT Leads, Rotary Arm, Distributor Cap, Engine Oil and Filter, Gearbox Oil,
This engine is in very good condition for its age and does not burn a lot of oil. It is a strong engine and made 171.1 hp with a custom 172 manifold and the standard Williams ECU and then 177.2hp with a chipped ecu. This engine does pull like a train and considering it is not cammed the potential is definitely there!
Parts included.
Complete Engine Minus – Gearbox, clutch, manifold, non pas bracket, water hoses, coolant bottle.
Including All Sensors, spark plug, ht leads, water pump, thermostat, rotary arm, distributor cap, Chipped ECU. PROV SOLD DEPOSIT TAKEN




Throttle Body Adaptors.




1 the worst one I made but still does the job. £25
1 The one that I made on the recent batch I made £35
1 That I made that is probably the best flowing £45




Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45




Original Williams Clocks and Aux Dials on about 72500 miles £50 Sold




Custom 172 Manifold made to fit an F7P / F7R with K-tec Decat (Twin Lambda) £220 This includes a genuine Renault manifold to cat fitting it (£30 Renault), Fits in a MK2 shell never tested to see if it fits MK1 Shell




Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 rpm £100




Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100




172 Polybushed Wishbones £60 Sold




Custom Brake Lines to run through the car and go through a Hi Spec manual bias valve £75 Sold




172 Cup Master Cylinder and Servo £75 Sold




Sparco Road Seats inc runners bolt in bolt out £180 PROV SOLD DEPOSIT TAKEN




172 fitment Gaz Coilovers GHA Inc AST Top Mounts (Less than 1500 miles) 300lb front 350lb Springs Rear £450 Sold




Lockable Aerocatches£30




172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted




172 Hubs £50 the pair (good Bearings)




172 Shaft £100 the pair




172 Rear Callipers £40 Sold




172 Front Callipers £20 each




172 Polybushed ARB £50




Polybushed Exhaust Mounts £20




Poly Carb Windows made by ACW Plastics! Fronts with sliders 4 small holes. (Few marks from sliding back and forth). Rears with 2 holes each side for pop out vents to let air in. Black boarder kit (Started to do will need finishing) £200




T7 Lightweight heater and ducting. Everything needed to fit £110




Battery relocation kit including BMW positive terminal, battery kill switch and Odyssey PC680 battery £100 SOLD




Oz F1 Wheels Matt Black (DIY Refurb) With 2 good and 2 reasonable Toyo Proxie PX4 £150 PROV SOLD DEPOSIT TAKEN




Blue 4 Point TRS Harnesses Out of Date December 2012 £120 (Pair) PROV SOLD DEPOSIT TAKEN
Few more bits to add


Oz Supperleggras 15” 4 x 100 ET 37. 4 Used Toyo R888’s perfect for track (don’t think they are road legal). 2 wheels are in good condition and the other two have marks. Perfect for a set of track wheels as these are ultra light weight! Also come with Genuine Oz Spigot Rings to fit the clio centre bore (whatever it is). £400ono


16 of these. M12 x 1.5 70mm long. £6.59 each
http://www.demon-tweeks.co.uk/motors...onversion-stud


16 of these. M12 x 1.5 60 degree taper 19mm head 27mm long. £6.43 each
http://www.demon-tweeks.co.uk/motors...open-wheel-nut


Looking for £115 delivered.


Black TRS Tow Strap x 2 £12 posted (Each)


Phase 1 Gear Stick £25


Drilled and Grooved Front and Rear Discs (rears have good bearings) Inc Mintex Pads for the Rear £100


Camber Bolts £15 Sold


Mocal 13 Row oil Cooler – Thermostatic inc anti vibration bolts (Prevents cooler cracking) £135 Posted


Manual steering conversion. Column and rack. Rack has 172 arms and track rod ends


​more bits to be added




Link to my project thread








http://www.cliosport.net/forum/showt...p-12-DEADLINE)




More parts to come just need to remember them and look through the garage

[Squeak]

Working away this week so pictures of supperlegras will come soon.


courier is picking up the following bits today


battery relocation kit
rear calipers
172 clocks
wishbones
coilivers asts camber bolts


the oz wheels, trs harnesses, bucket seats, eyelets, stress plates, steering wheel, boss and snap off boss were all collected last night thanks guys

[Squeak]

UPDATE 09/07/2013

Right the time has come to break my track car:

This car has MK1, MK2 and MK3 parts


I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.


The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
£350


The engine is a MK1 2.0 F7R Williams Engine. The mileage of the engine is approximately 72500 (have original Williams dials and documentation to prove mileage).
At 71 257 miles the following was done to the engine prior to me fitting it in the car.
Replace Cambelt and Tensioners, Water Pump, Thermostat, Spark Plugs, HT Leads, Rotary Arm, Distributor Cap, Engine Oil and Filter, Gearbox Oil,
This engine is in very good condition for its age and does not burn a lot of oil. It is a strong engine and made 171.1 hp with a custom 172 manifold and the standard Williams ECU and then 177.2hp with a chipped ecu. This engine does pull like a train and considering it is not cammed the potential is definitely there!
Parts included.
Complete Engine Minus – Gearbox, clutch, manifold, non pas bracket, water hoses, coolant bottle.
Including All Sensors, spark plug, ht leads, water pump, thermostat, rotary arm, distributor cap, Chipped ECU. PROV SOLD DEPOSIT TAKEN


Throttle Body Adaptors.


1 the worst one I made but still does the job. £25
1 The one that I made on the recent batch I made £35
1 That I made that is probably the best flowing £45


Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45

Custom 172 Manifold made to fit an F7P / F7R £120 Fits in a MK2 shell never tested to see if it fits MK1 Shell

K-tec Decat (Twin Lambda) £100
Genuine Renault manifold to cat fitting it (£30 Renault) £15

Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 rpm £100


Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100

Lockable Aerocatches £30

172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted

172 Hubs £50 the pair (good Bearings)

172 Shaft £100 the pair

172 Front Callipers £20 each

172 Polybushed ARB £50

Polybushed Exhaust Mounts £20

Poly Carb Windows made by ACW Plastics! Fronts with sliders 4 small holes. (Few marks from sliding back and forth). Rears with 2 holes each side for pop out vents to let air in. Black boarder kit (Started to do will need finishing) £200

T7 Lightweight heater and ducting. Everything needed to fit £110

Oz Supperleggras 15” 4 x 100 ET 37. 4 Used Toyo R888’s perfect for track (don’t think they are road legal). 2 wheels are in good condition and the other two have marks. Perfect for a set of track wheels as these are ultra light weight! Also come with Genuine Oz Spigot Rings to fit the clio centre bore (whatever it is). £400ono

16 of these. M12 x 1.5 70mm long. £6.59 each
http://www.demon-tweeks.co.uk/motors...onversion-stud

16 of these. M12 x 1.5 60 degree taper 19mm head 27mm long. £6.43 each
http://www.demon-tweeks.co.uk/motors...open-wheel-nut

Looking for £105 delivered.


Black TRS Tow Strap x 2 £10 posted (Each)

Phase 1 Gear Stick £25

Drilled and Grooved Front and Rear Discs (rears have good bearings) Inc Mintex Pads for the Front & Rear £100

Mocal 13 Row oil Cooler – Thermostatic inc anti vibration bolts (Prevents cooler cracking) £135 Posted

Manual steering conversion. Column and rack. Rack has 172 arms and track rod ends £80

​more bits to be added


Link to my project thread


http://www.cliosport.net/forum/showt...p-12-DEADLINE)


More parts to come just need to remember them and look through the garage