head cams and pulleys

[bbracer16valver]

ive heard bad things about them i no people that run them but i dont want to personally

[northy]

i would put that down to bad fitment more than bad products!!!

[cliorod]

Hi.
It has no verniers and is currently stripped,and wants re-assembling.I keep looking for a set set of used verniers,but none about at the moment.

[zmaster2k]

Kent pullies failed iirc, I use pipers.

Cams are cams

[16v_paddy]

Kent pullies failed iirc, I use pipers.

Cams are cams

Was the old design of kent pullies that had problems & they got redesigned iirc

[bass_direct]

Yea I've had the new design Kents before and they were fine

[bbracer16valver]

any info on the old and new ones ? like a pic of each and which to avoid like the plague

[Wobba]

Well, I guess the man wants CatCams

Piper are good too.

I heard some Kents wear too fast. Probably Internet bullshit tho.

I have some 225 Catcams, trouble is I need to have a seized bolt drilled out first.

I have a standard willy head here too somewhere.

The headwork is what is going to cost you. Could get a bigger valve Meg head and have it worked for gay-boy dizzy use maybe and stick cams in? Have to keep eyes peeled for bargains like this mate...full head and cams etc I mean.

[bbracer16valver]

i found a head i want but kiddy wants more than i wana give so still in talks

and whas about the catcams? my dads a fabricator so bolt removal wouldnt be to hard,, by question is is how has a bolt got stuck in a cam? the end one snap?

[16v_paddy]

by question is is how has a bolt got stuck in a cam? the end one snap?

Scamming incompetent trader cross threading the bolt & using an air gun to keep winding it in