Can we get bucket seats etc cheap as a Club anywhere, and where can I get some nice seat runners for them too? I am not tall so can't sit too low!
Fanks :D
Can we get bucket seats etc cheap as a Club anywhere, and where can I get some nice seat runners for them too? I am not tall so can't sit too low!
Fanks :D
You can buy my seats quite cheap if you like
With proper mounts you can adjust the height to suit, I got mine from larkspeed iirc, not cheap but well worth it imo as they're mk1 clio specific. http://www.larkspeed.com/index.pl?p=COSFRE03&a=i
Depending how high you want to go you might want to get side mounts instead of just base mounts
What are those big side ones I see? Do they fit on the base bit?
will they work on a phase 2 though? **** payhing £113 for mounts for them not to fit
You forgot what my car is then you retard??
They replace the whole lot Matthew, they're their own runners so it doesn't matter what phase the car is, wouldn't be surprised if they're lighter than the standard stuff either
These. As the name implies they fit to the side of the seat
thumb_SparcoSideMounts1l.jpgCobraSideMounts.jpg
Now the subframe I posted up earlier - this is harder to explain as I never took any pics when fitting mine - comes in 3 parts, 1 bolts to the floor of the car and the other 2 parts are the actual runners, they bolt onto the bottom of the seat and then onto the bit you bolted to the floor. With the side mounts, you'd bolt them onto the side of the seat, then onto the runners, then onto the bit on the floor. At worst you might have to drill some holes in the bottom of the mounts to line up with the bolt holes in the runners.
Clear as mud?
I am retarded.
pewpew:
http://www.k-tecracing.com/show_prod...d=4306&appid=1
??
£22 cheaper here http://www.ebay.co.uk/itm/BUCKET-SEA...item1e6fc0f7a2
With the side mounts, are they universal?As I wouldn't have thought the holes would be in the same place on every model.
I'm not 100% sure but I think all side mountable bucket seats have the holes in exactly the same places plus on every side mount bracket I've ever seen 1 set of holes are slotted to allow for slight differences