As most do, tend to spit the fluid out the top a bit, anyone come up with a way to stop it?
As iv been away from mk1's for a few years, thought id check!
As most do, tend to spit the fluid out the top a bit, anyone come up with a way to stop it?
As iv been away from mk1's for a few years, thought id check!
You can drill it and it a banjo bolt and run a pipe through to an overfill bottle, but tbh is its it leaking much I wouldn't bother.
as above, they do it as the rack pressure relief valve wears with age, nothing to worry about so long as its not coming out in litres
can either make a catch tank or enjoy the rust stopping properties as it drips all over the inner arch, its like free waxoyling
Lol! Na, it's not much, just me being picky
Run the level a little lower helps, but obviously you still need to have some fluid in the header tank.
ive done this
CLIO WILLIAMS 0215
i have the same issue could you please let me know where you have ran the pipe to
I just ran it through the arch liner on the inside keeping it well away from the brake caliper and disc......
CLIO WILLIAMS 0215