Sticker location.. again

[vkosho]

Hi there, Ive done a little search but still can't conclude on this so please help if you can. I purchased some phase 1 copies recently of Wrighty..

They seem really good but no template, So what are the correct measurements for positioning the williams side stickers in relation to the rear quarter side strip, in terms of gap and distance in from the end? Pics would be helpfull or if anyone can measure theirs that would be great, It would be nice to get this as close to perfect as possible.

Thanks a lot. and I await the onslaught of moans :D

[FATBOY]

from top of bump strip to bottom of sticker 18mm

from edge of sticker to edge of bump strip 10mm

same both sides :D

measured mine out as mine is going in for the arches on 12th may :D

[MatBrown]

I'm sorry Paul, but that is wrong.
There should be enough space to fit the number on if it needed one.

[vkosho]

Thanks very much for those measurements Fatboy.

This is a bit controversial with the numbers supposedly being able to fit on after the letters. Mine was originaly too close to the edge to do that, this was also supposed to be the original arches and stickers too.



Still confused..

[Red_Dash]

I have a 50,000 mile Williams 1 that I've owned since 1998. I'm 100% sure it's never had any bodywork in that area. If you don't get the measurements in the meantime, then I'll post some up for you when I get home tomorrrow to help confirm.

[FATBOY]

hmmmmm even on a williams 1 mat??? why would you want space for numbers if when they were produced, the 2's and 3's were not even thought of(or were they?), im adament mine has never had any bodywork in the past? or new decals? so if what you say is correct then my WILLIAMS decals should measure up the same as whats on the WILLIAMS 3 then??? i await peoples views on this :D

[MatBrown]

Yes mate, even on a willy 1.
The williams logo should be in the same place across all models as the application paper was the same design.
The designers may well have thought of leaving the space beforehand.

There are not many cars out there now that have never had any bodywork, trust me i've been looking for years.

Here's what they should look like (ignore the phase 2 bumpstrip).

[MatBrown]

so if what you say is correct then my WILLIAMS decals should measure up the same as whats on the WILLIAMS 3 then??? i await peoples views on this :D

That depends how much paint your willy 3 has had.

[p4cks]

This pic suggests that there is a little bit of a gap before the Williams decal shows. I'd have thought the other side would be exactly the same

http://www.pedaltothemetal.com/index...tch_ever_.html

[FATBOY]

whats your mesurements then mat?