Williams 1 number 125 turbo

[franksvalver]

Massive spec

Graphite Grey turbines with as new r888s £425
Williams wheels could do with some tlc with as new toyo t1rs £275

Hispec 285mm four pot, Williams/valver fitment with Brand new discs and ferrodo ds2500 pads. All as a kit £450
As new rear calipers £35each

Valver subframe with new anti roll bar bought new in 2009, powerflex polybushes and new Williams wishbones and track rod ends. £150

Ok here are the goodies.

Williams head, 33ms valves, uprated catcam follower springs, highly ported and polished. £750
Turbo spec catcams including vernier pulleys. £550
Williams B/E. Low compression Wossner pistons, lightened and balanced crank, forged conrods (ktec), reconditioned oil pump. £800
Helix 172/megane four paddle clutch. As new. £200

JC5 Williams gearbox. Bought brand new in 2011. Used for LESS than 2500 miles. No whines, crunches. Superb box. Will come with 3 litres of the ELF 75w/80. Receipt still available for proof of new purchase. Am after £550

200-300mile old Gt28 wet bearing turbo. Complete with a cossie 4x4 front end £250

Emerald K6 standalone ecu. Brand new last year. Complete with correct wiring loom to clip straight into any mk1 clio. Map currently on is a 283bhp turbo build. £500

13 row Mocal oil cooler. Thermostatic. Inc pipes. £80

400cc Hi impedance bosch injectors. £100

FSE adjustable fuel pressure regulator complete with visual 7bar capillary guage £60

Walboro 255 hi flow fuel pump. Ready to fit to tank. £100. Flowed over 4bar no problem.

Brand new unused brake biase valve, not standard renault part. Manually adjustable from hispec £35

[dhay14]

hi mate

ive got a question on the emerald ecu. do i have to use a 172 fly to run this ecu or can i huse min willie item without a problem?

reg

dhayrone

[robi1000]

Pm'd about oil cooler!

[franksvalver]

hi mate

ive got a question on the emerald ecu. do i have to use a 172 fly to run this ecu or can i huse min willie item without a problem?

reg

dhayrone

Can use the williams itemyes. Will work better with a 172 as it has the better trigger pattern. Very easy straight swop dude. Boltstaight onto the williams crank

[WILLIAMS2TURBO]

Hi have you got the complete car?

Could be interested whole?

Best to call or tx on 07974785947

Thanks Paul,

[Coops]

this was killed and sold off long ago i believe fella

[diditno]

Its in the big parts bin in the sky matey

[WILLIAMS2TURBO]

Wow blast from the past coops and Steve how u both doing?

You still got your tungy coops? (was grey with yellow hoses last time I saw iti had the the Williams2 hence te name)

Steve did you strip my old willy turbo you had mate?

Really want another I you guys know of any?

[Coops]

steve swapped engine out of the willy turbo, he still has the car on standard lump. the turbo bits live on on other motors, I have the exhaust

ai still got the XERUS grey phase 2 fella, just literally finished rebuilding the engine after cracking the block at donington park last year. been in process of buying a house so funds and time have been tight but hope to have it run in and ready for blyton park and the RTOC day there end of July

[BazEdgar]

Thanks to some complete dick reversing into my car at some point in the nightand driving off, I could use a passenger door

Thanks