Am i being silly.

[chip]

They arent especially fast cars as standard once you get into fifth gear.

[sclark2604]

its just had a full service with cambelt change too. the only other thing i can think of is that its got the idle problem when you go over 4000rpm, maybe thats giving false readings.

[Wobba]

it wont be idling at 4k hehe.

[Wobba]

I guess if they timed it wrong it would be a bit pants.

Its hard to say really without driving it!

[Markic]

My Willy will do 140 - no problems. K&N panel, proper exhaust and a Gunner chip.




My car hits the limiter in 5th gear at almost 150mph!!!!!!!!!

[andyleep]

That's one hot, thirsty, hard-working engine!

[Wobba]

My Willy will do 140 - no problems. K&N panel, proper exhaust and a Gunner chip.




My car hits the limiter in 5th gear at almost 150mph!!!!!!!!!

Not long for a new HG then

Mine pulls harder and harder the higher up you go

[Markic]

My Willy will do 140 - no problems. K&N panel, proper exhaust and a Gunner chip.




My car hits the limiter in 5th gear at almost 150mph!!!!!!!!!

Not long for a new HG then

Mine pulls harder and harder the higher up you go

No, it was just being done few thousand miles ago.
It's not something willy's like, top speed. But it's OK to try like I did.

HOT, they are so damn HOT. Oil gets to 130C when I floor it in 5th!

[Markic]

That's one hot, thirsty, hard-working engine!

HAHAHA that's right matey!!! :D

[chip]

Speedo is probably over reading, have you checked it against satnav?