He means original Renault yellow fogs. Clear glass with yellow inside(reflector) instead of having yellow glass.Originally Posted by FATBOY
He means original Renault yellow fogs. Clear glass with yellow inside(reflector) instead of having yellow glass.Originally Posted by FATBOY
I would be interested in what 280 mm diameter disc you are going to use ,The R26 uses a 31mm x 28mm thick disc,the thickness 280mm diameter disc from AP is 25.4 mm and requires mounting bells etc.At the moment I have fitted 280mm discs and RS hubs, but with normal calipers. I have to fabricate adaptors to fit Brembos.
Rod
ooops meant 310mm diameter x 28m thickThe R26 uses a 31mm x 28mm thick
Sorry Rod
I plan on using Scenic 300mm x 24mm front discs until I save for AP racing or Alcon (on bells) 28mm thickness discs also around 300mm.
I think 24mm thickness should be fine while the pads are new. Not too good when worn tho.
Robi1000
I would be interested in the way you achieve putting the R26 Brembo calipers on the 300mm Disc under a 15" rim.I have tried practically every permutation of disc/brackets to use this caliper,but because of its overall length it becomes a major problem,when moving towards the edge of the disc.where the edges of the pads should be flush with the disc.
300mm discs and Brembo calipers go under 16" rim For 15" I think 288mm is max. (depends on rim type), so 280mm is a safe way to go
Yeah, I forgot to mention that I'll fit them under Speedline 2012 16''.
EDIT: You can still fit 280mm discs under 15'' without problems.
This is a 305mm x 25.4 mm thick disc and Alcon calipers ,no problem under a 16" Speedline.
This is a 295mm x25.4 mm thick AP Disc and CP 5000 AP four piston Caliper which goes under a 15" 16 valve Turbine