WANTED fuel pump housing/bracket

[davidbuttigieg]

Hello mates,


I am needing all the parts needed to fit the fuel pump inside the tank. Basically all the parts shown in the picture below except the fuel pump. I believe there are various types of variations of these housings but I think they all fit the same, right ?



I will also be needing the wiring socket that goes into the housing from the outside. I will be fitting a 16v tank to my Renault 5 GTT so I am lacking all of the parts.

Will also be needing shipping to Malta please.


Cheers,

David.

[northy]

that pump is out of a phase one clio, there was a few differant types fitted over the years.

Do you want one with a built in fuel level sender ?

[davidbuttigieg]

that pump is out of a phase one clio, there was a few differant types fitted over the years.

Do you want one with a built in fuel level sender ?

No, I have a seperate fuel sender.

As you say, there are different types, but do they all fit the same ? I believe there is only 1 tank so they should, right ?

[davidbuttigieg]

So, I bought the tank from a scrap yard and it was full of water so the metal inserts (and the fuel pump) in the housing where all rusted so I left these there and took only the tank.

I found a picture of how the housing looked like ------->




Now, If i buy one like the one in the previous picture, will it fit just the same ?

[northy]

that pump is out of a phase one clio, there was a few differant types fitted over the years.

Do you want one with a built in fuel level sender ?

No, I have a separate fuel sender.

As you say, there are different types, but do they all fit the same ? I believe there is only 1 tank so they should, right ?

if you have a separate sender fuel tank then you need a true phase 1 fuel pump only from a j - k reg car.

A williams pump or a phase 1.5 / 2 valver pump has a sender built in. (IMO)

[davidbuttigieg]

that pump is out of a phase one clio, there was a few differant types fitted over the years.

Do you want one with a built in fuel level sender ?

No, I have a separate fuel sender.

As you say, there are different types, but do they all fit the same ? I believe there is only 1 tank so they should, right ?

if you have a separate sender fuel tank then you need a true phase 1 fuel pump only from a j - k reg car.

A williams pump or a phase 1.5 / 2 valver pump has a sender built in. (IMO)

So I need to find a fuel pump housing from a phase1 16v ONLY - Williams or later phases are not the same. Right ?

Thanks for the information

Do you have one ?

[northy]

sorry i dont.

the spare fuel pump i have i am keeping. I only have the fuel tank and sender unit from a k reg car.

Unless u can fit a williams tank and then swap everything over.

[davidbuttigieg]

:( OK

[davidbuttigieg]

anyone ?! pleaseeeeeeee