Oil temp/level sensor price

[robi1000]

Hey!

I got this sensor at the scrappy yesterday, but it seems a bit different then the one in the first pic:

sensor I got yesterday:


I found this pic on the net, but it's supposed to be the right sensor


My question is if I can use this new sensor and to what it was originally fitted (guy at the scrappy gave it to me, so I didn't remove it from the engine). I think there might be a problem, because if I'm not mistaken there are 3 wires coming out of the original and only two pins on the one I have. So does this mean it only has oil level and no temp sensor?

[MatBrown]

That looks like an R19 one.

[Wobba]

Probably be fine, just solder wires on.

[robi1000]

Ah, I'll just try to source a valver one. Thanks for the help!

[midge]

I'll check my spares box, if i have one you can have it for the price of postage.

[robi1000]

That would be great!

[cliokongen]

Hey!

I got this sensor at the scrappy yesterday, but it seems a bit different then the one in the first pic:

sensor I got yesterday:


I found this pic on the net, but it's supposed to be the right sensor


My question is if I can use this new sensor and to what it was originally fitted (guy at the scrappy gave it to me, so I didn't remove it from the engine). I think there might be a problem, because if I'm not mistaken there are 3 wires coming out of the original and only two pins on the one I have. So does this mean it only has oil level and no temp sensor?

If the lenght and the placement of the holes (where you can see the thin wires) are in the same place - it should be the same...

[robi1000]

Yeah, but mine has 2 pins and the one in the pic has 3?

[cliokongen]

hmmm.....

[diditno]

I have one from my Williams 2 block, fully working etc for sale. Same as the one pictured a few posts above. Pm if it's any use.