whilst removing my sub-frame for powder coating i undid the clevis bar from the gear selector.
when refitting the the gear linkage to the selector i fitted one of the metal bushes i got from Yanoo, and when on a test run only to find i've got all 5 forward gears but no reverse now?
when i try to select reverse it it jumps back across in first?
the only thing that may have moved whilst taking it on and off is that the gear selector twists either clockwise/anti-clockwise but surely this doesn't adjust the linkage by doing so?
i disconnected it all again and went through all the gears with the selector by hand and it selects ok. i also put it in reverse and got a friend to hold the gear stick in where reverse should be, noticing the clevis bar sits back about an inch from the selector.
to adjust do i need to just lengthen the linkage to rear the selector when its seated in reverse?