If you put 16v suspension on a williams, how far out would the camber be?
Is it correctable with the use of camber correcting bolts on the lower shock fixings?
If you put 16v suspension on a williams, how far out would the camber be?
Is it correctable with the use of camber correcting bolts on the lower shock fixings?
Not doable camber bolts would not remove enough camber you would eat through tyres at a tremendous rate
ok.
cheers.
Yep not doable!
Did It on mine....lush handling in the corners....bit of train on the motorway..ate new tyres to bald point In 2000 miles
I run it on mine, going to get sme camber bolts to reduce the camber, as above, great in corners, but pulls all over the road on straights, especially country roads.
Still want more camber than std, but less than what i have
Thants all the Cup racer set up entails geometry wise.....