1.8 16v ECU on my willy

[morley2212]

Iv come across a 1.8 16v ECU that has been chipped/remaped. would it fit my williams with no problems??????

[zmaster2k]

Would fit, doubt it would work very well.

[Wobba]

Needs to be an EPROM for a 2.L F7R otherwise it will run like a dog.

[James5]

Instead of starting a new post I thought i would add to this thread, i have also been offered a phase 1 1.8 16v with chip caddy which I am considering using on a williams turbo engine conversion, I understand the map will be wrong but if I am to get it mapped properly for the williams turbo conversion would it be ok? I mean all the fuelling will be done in the mapping?

Cheers James

[kj16v]

Hi yes the 16v ecu should work in the Willy. As you already, mentioned, it will definitely need remapping though - which I can do for you!

[zmaster2k]

highly recommended! :D :D

KJ16v mapped my car... totally transformed it

[Squeak]

Not to long until mine is done aswell! i have the ecu with chip carrier installed ready and waiting!

[James5]

Hi yes the 16v ecu should work in the Willy. As you already, mentioned, it will definitely need remapping though - which I can do for you!

Perfect exactly what I wanted to here, Once finished I do plan on using yourself (KJ16v) to map it for me I have heard alot iof good things about yourself, what psi is it save to use the standard ECU obviously mapped upto and when do peeps look to go standalone?
I am prob looking at running around 20psi +