simple one for you...

[ThRaXaIR]

is the inlet manifold and throttlebody the same on a f7p and f7r?

cheers

[northy]

depends on what car it is from.

Valver yes - R19 no. As the design of the inlet manifold is differant.

[ThRaXaIR]

ok im thinking 16v f7p into a williams f7r? so all good then? cheers mr North

[cliokiz]

I've you're taking the inlet manifold from a 1.8 16v removed from a CLIO, then yes they're the same and it'll fit on an F7R Williams engine no problem.

To be fair, even if you used a Renault 19 manifold and throttle body, it'll still fit, it's just slightly different.

[schakal]

I've you're taking the inlet manifold from a 1.8 16v removed from a CLIO, then yes they're the same and it'll fit on an F7R Williams engine no problem.

To be fair, even if you used a Renault 19 manifold and throttle body, it'll still fit, it's just slightly different.

the mouth of the t/b is totally different .
also is it not the case that accelerator cable ends are different too ??

[zmaster2k]

I've you're taking the inlet manifold from a 1.8 16v removed from a CLIO, then yes they're the same and it'll fit on an F7R Williams engine no problem.

To be fair, even if you used a Renault 19 manifold and throttle body, it'll still fit, it's just slightly different.

Not with stock airbox I doubt!?

[cliokiz]

I'm not saying anything else would fit, i was merely saying the inlet manifold and throttle body would fit (not that they'd be much use in a clio)

Should have made that clearer!

[volymmannen]

Its a big difference on F7R Megane and F7R Willams