Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Forum User zmaster2k's Avatar
    Join Date
    Feb 2006
    Location
    Blandford Dorset
    Posts
    1,011

    BIG THANKS TO CLIOLORD AND KJ16V

    Well what can I say, after my car ate it's nice quality BGA head gasket due to detonation me using wrong fuel!

    Car was delivered to the lord where he discovered that the timing was just ludicrously miles out! Gaz spent hours tinkering with my timing in the workshop a few degrees here few there.....anal ain't the word!

    So went to pick the car up after it's been fettled!
    First impressions was.... Wow it's clean!....then took it for a drive! Firstly my skuttle induction is loud! Very loud! It wasn't like that before! Then there was a usable amount of lower in places I e never had it! Like below 2k!
    But as we didn't know if the eni g was detonating we didn't "really" push her!

    Next day we drove to Kj16, well what can I say! What a genuinely nice guy! Very enthusiastic about his work!
    We took the car straight to the rolling road and ran it up with the very random chip I was using! Kj put some det cans on and had a good listen! No detonation....good times!
    Did 4-5 runs on the rollers, each within a fraction of a horse power!

    180bhp
    143lbs ft
    147@ wheels

    But the AFR was all over the place running lean low down then rich up top!

    Then it was down to kj16v, wired up a wideband and his detcans and ecu emulator and took to the road.....with gaz who was just itching to see what was involved with mapping the stock ecu!

    After cleaning up the afr kj set about tweaking the map! After a few hours I was presented with my car for a test......gaz was smiling so thought ok!!!


    We don't have an after printout but.....


    WOW! Really wow!

    Car is just incredible! There is usable power just everywhere! Then it gets to 4.5k and goes nuts! And pulls Hard right to the end if the revrange!
    2krpm to 4krpm is also vastly different!

    Gaz kept telling me this is what my car always should of been! And now Against JGX his itb'd monster that used to disappear into the distance against my car, it now still gets away from a rolling start but I'm much closer to him than I used to be! (8 car lenghths instead of 4 miles lol)

    As it happens we went to the 519 automotive openday, where Danny failed to save me some paddy sausage! So I took my revenge unplugging sensors on paddies car :-p

    Gave my car to (sideways)Danny for a spin....and he was gone.......a while! He was also very impressed with KJs mapping! But obviously reminded me that cars suspension needs tweaking lol!

    So overall result is great! Very very happy!

    Kj and Cliolord have changed my car! It's savage!

    If you have a stock ecu kj is your man without any doubt!

    And we all know cars touched by the lord are special!


    Its the car it always should of been Guys.. so thank you lots and lots!

    Epically Brutally Savagely Uprated!

  2. #2

  3. #3
    Subscribed Member LEIGH-ANNE's Avatar
    Join Date
    Jun 2005
    Location
    Southampton
    Posts
    4,446
    Brilliant! Really pleased for ya matt.

    These 2 obviously need to team up here and make things happen. I have plans for my williams 2 which i have at least one of these 2 people invoved.

    I bet your over the moon.

    Now i know gaz is good mates with you, but the question everyone will be asking is how much did you spend on this?

    Or gaz....how much of your time did you spend and how much would this cost anyone else.

    Same with KJ.....


    Happy Days!

  4. #4
    Forum User zmaster2k's Avatar
    Join Date
    Feb 2006
    Location
    Blandford Dorset
    Posts
    1,011
    I paid KJ what he advertises..

    and as for gaz he is a mate and i insisted i pay him, i paid him £300 for head gasket replacement,

    £140 for other bits... and bobs that needed doing.

    and i was the Official Guinea Pig for cam timing and he has worked wonders.

    What ever he decides to charge i think will be worth it.

  5. #5
    Forum User
    Join Date
    Apr 2008
    Location
    Stroud - Gloucestershire
    Posts
    1,383
    been telling you lot these guys are the nuts for ages! Tssk keep up! :P

  6. #6
    Forum User zmaster2k's Avatar
    Join Date
    Feb 2006
    Location
    Blandford Dorset
    Posts
    1,011


    before mapping

  7. #7
    Forum User snowman's Avatar
    Join Date
    Oct 2006
    Location
    Bristol
    Posts
    1,395
    Why do you think ive asked Gaz to help with KUX

  8. #8
    Subscribed Member LEIGH-ANNE's Avatar
    Join Date
    Jun 2005
    Location
    Southampton
    Posts
    4,446
    Quote Originally Posted by ThRaXaIR
    been telling you lot these guys are the nuts for ages! Tssk keep up! :P
    I hate it that your always right tombe :D

  9. #9
    Forum User
    Join Date
    Apr 2008
    Location
    Stroud - Gloucestershire
    Posts
    1,383
    Quote Originally Posted by LEIGH-ANNE
    Quote Originally Posted by ThRaXaIR
    been telling you lot these guys are the nuts for ages! Tssk keep up! :P
    I hate it that your always right tombe :D
    Its a talent! :D

  10. #10
    Forum User kj16v's Avatar
    Join Date
    Jun 2005
    Location
    Live remapping. ECU chipping
    Posts
    1,125
    Hi. Good to know the Clio puts a smile on your face!


 

Similar Threads

  1. Cliolord @ Bristol
    By Laine_16v in forum Main Dealers & Specialist Renault Garages
    Replies: 38
    Last Post: 01-06-2013, 11:59
  2. Big Thank you to Cliolord ( but my problems continue lol )
    By jay s in forum WilliamsClio Discussion
    Replies: 20
    Last Post: 08-03-2011, 00:01
  3. FAO : Cliolord
    By schakal in forum Off Topic
    Replies: 7
    Last Post: 24-11-2010, 18:11
  4. FCS 07 Track pictures FAO Gaz, Northy, Cliolord
    By Danny-ACE! in forum Pictures
    Replies: 22
    Last Post: 26-11-2007, 22:12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •