Hubs + extender + wishbone with uniballs (rod end), no bushes but bearings.Originally Posted by cliokongen
Project still going on, car is 90% ready. Had some issues with the clutch, had to modified the bearing. And the other thing is the rh driveshaft. Bought sadev's but one is too long :( Cup springs are removed and replaced with the nordsleiffe set up from Bilstein, give's a bit more comfort on public roads.
any more news on this? its been a while now... still havent had a chance to call over would love to see some pics of the car
results at 0.6 bar (8.5psi) and 0.9 bar (13 psi) with 803's on stock fuelpump. Unfort. the pump cant handle the 0.9 bar in higher revs. (these are wheelfigures ;) )