Outer cv joint and gaitor? Drivers side
poss a shaft too
Outer cv joint and gaitor? Drivers side
poss a shaft too
iirc some people have used these ones before and said they were all right
http://cgi.ebay.co.uk/RENAULT-CLIO-O...item1e5d9c54a3
I used that one and it didn't fit
I have a brand new one £30 or i can give you a drive shaft with a good joint for £20 (i will cut it down to save post, the inner joint is **** and its valver anyway)
changing the cv joint is a bit of a task to be honest ,plus if its the
actual tullip that is fokkered you will be pissing against the wind .
i would get a driveshaft thats known to work tbqfhwua .
cant say i've ever had a problem changing the cv on the shafts and i've used a few of the ones in that link now for various shafts and they have been perfect. as laine says its just a case of pulling the circlip apart while whacking the cv off with a mini sledge hammer, works for me every time :D