Flow cylinder head Renault

[jualcar]

Hi

I´m from of Spain and I´m seeking information of businesses in England that are dedicated to carry out works of flow cylinder head for competition for my clio williams Gr.A

I have seen many businesses but the truth I have doubts, which is good and of confidence. Here I put all the businesses that have gone finding

hiflowheads

http://www.hiflowheads.co.uk/

Ultimate

http://www.ultimatep.com/

cylinderheaddevelopments

http://www.cylinderheaddevelopments.co.uk/

neilroper

http://www.roperdevelopments.co.uk/

impulsedevelopments

http://www.impulsedevelopments.co.uk/

angel-works

http://www.angel-works.co.uk/

cncheads

http://www.cncheads.co.uk/


I´m sure that there are many but, if someone knows them and he can put them a lot better.

What business you recommend me of confidence

Regards

[northy]

PORT FORMANCE

http://www.po-fo.com/

07767787097

[rochdale_williams]

Seconded on port-formance. Ste really is the man on these things. Nice bloke too

[jualcar]

PORT FORMANCE

http://www.po-fo.com/

07767787097

Please, this business have address of e-mail??

[Laine_16v]

Don't go anywhere near Angel Works, they are utter garbage.

The meganne head that i had that was "gas flowed" by angel works. Had 100% identical flow to a standard head until past valve lift of 11.2mm (which was pointless as the cams in it at the time were like 10.6mm lift!)

AVOID ANGELWORKS.

[jualcar]

Don't go anywhere near Angel Works, they are utter garbage.

The meganne head that i had that was "gas flowed" by angel works. Had 100% identical flow to a standard head until past valve lift of 11.2mm (which was pointless as the cams in it at the time were like 10.6mm lift!)

AVOID ANGELWORKS.

I ask information to angelwork some months ago and he send me various mail reporting of all the work and the truth all very pretty and easy.

OK, ANGELWORKS. OOOOUT. Very Thanks

What opinion have of these businesses, they do not seem informal, someone knows them or has information

http://www.ultimatep.com/
http://www.impulsedevelopments.co.uk/

[scratabout1988]

PORT FORMANCE

http://www.po-fo.com/

07767787097

Where abouts is port performance located?
The site's still under cinstruction,

[rochdale_williams]

He's based in warrington, best bet is to ring him and he'll go through it all

[MatBrown]

PORT FORMANCE

http://www.po-fo.com/

07767787097

Where abouts is port performance located?
The site's still under cinstruction,

I have a modified head available.

[2 live]

impulse used to be very good. theyv been doing this a long long time. not sure how they are any more tbh. iv had a few things done by them back in the day, 2 live recommended. ;)