Manual Mirror Adjuster Setup

[Coops]

I have messed up the adjuster by dismantling the mirror to change the outside temp sensor, is they a specific sequence to set it up again correctly? do the adjustment cables need to be lined up in a particular order and clamped in a certain place by the clamps inside the mirror housing in order to function correctly?

any advice or experience much appreciated

cheers

Ben

[MatBrown]

Pictures will help.


Mat.

[Coops]

its all back in 1 piece atm but i'll dismantle it again soon and show you mate, its a bugger tho, got new sensor in complete with connector undamaged but fubared the glass and the adjuster into the bargain!!!

least the damn temp display is now right and doesnt flash all the friggin time

[2 live]

and how many times do u adjust your mirror??

set it.leave as is....job done ;)

[Coops]

nah its not that thats the issue, its just the stalk inside is at a massively gammy angle, and that i cant stand, my mild OCD wont let me

[northy]

when i stripped them down they were coded to the white disk adjuster.

I rebuilt mine ok though - if you want to bring them over for me to have a look at let me know.

[Coops]

so follow the colour codes, keep top adjuster cable on top, bottom on bottom etc right through the brackets inside the mirror from white plate to adjuster knob inside?

[Wobba]

noob error lol :D

[northy]

as far as i can remember. i did make notes of where mine came from before i stripped it.

Make sure the interior adjuster is tight before trying to work it.

If its wrong you will tell when you move the adjuster as it will be reversed to what the movement should be if you get my meaning?

[Wobba]

Surprised this has got you bamboozled Ben! Trial and error mate :D