Guess the BHP contest

[Wobba]

As some of you know, I have had a bit of tuning on the horizon for little Willy 217 for a few months. Tomorrow (assuming I don't have any more last minute problems) should be the day it goes off to Stan (Craig) at AP Developments where it will go under the surgeons knife for a bit of lift and tuck

Before work is started, Craig has said he will measure the BHP so we can see the increase, if any (lol) in torque and power.

I am having a little contest to see who can guess the current power my car is producing at the flywheel (subject to calculation if necessary if power is measured at wheels) BEFORE work is done.

To give you a fighting chance, I shall list current engine related mods:

F7R 714 block, about 92000 miles
F7R 700 recently refurbished head
ITG panel filter
Gunner 180 chip with 7100 limiter
Standard (heat wrapped) exhaust and inlet manifold
Standard (heat wrapped) downpipe
Decat pipe
Straight through unsilenced 2" Supersprint mid section
Magnex backbox

Other minor details, but which some super techie people may ask:

New Pipercross oil filter
3 BAR oil pressure at idle when cold
10w 40 Semi Synthetic oil

So...roll up roll up. 1 guess each and you may include torque if you are feeling confident :D

Assuming Craig has no problems with me doing it, I may do the same for the 'post-surgery' results as well.

It will be interesting to see what the Wobbamobile has been pushing out till now.

The winner gets a Wobbahug @ FCS :D

[G33R7]

pff alot i guess. i say 180 @ the crank

[katbloke]

173

[schakal]

165bhp

[richy]

159.7bhp - 125lb/ft torque

[2 live]

i reckon 140 at the wheels now...sorry...dont do fly guesstimates ;)

and 170 when done.

[Justin..]

163 atf

[MatBrown]

42.


Mat.

[Wobba]

42.


Mat.

Deep Thought is not my rolling road Mat. Nice try though

[Tommo]

150