Non p/s setup

[Matt_16v]

Hi everyone

Putting a Williams engine in my 16v tomorrow.
The car has not got power steering, so I need to source a way of removing the power steering pump from the engine. AFaik I need a bracket off of a volvo and a different belt.
Can anyone confirm the parts that I need/and any part numbers?

Many thanks,
Matt

[Neepdocker]

Could e mail you photos of the parts you need.Don't have part numbers I'm afraid.Give me a shout if this will help.

Ranald.

[Winston]

http://www.clio16valver.co.uk/board/...p?f=10&t=29643

[schakal]

http://www.clio16valver.co.uk/board/viewtopic.php?f=10&t=29643

we dont all have money burning holes in our pockets
what are you doing here anyway ?? edition38 down or something ?





:D

[Winston]

Only the same money grabbing shite on here tbh

Im like a bad smell you can never get rid of.... plus still got french parts to shift lol

As im nice I will post the guide in my next post ;)

[Winston]

PAS to Non PAS Conversion

I did this conversion on my first black Clio Hybrid many years ago and I have fitted the set up to every clio ive owned since.. A must mod for me
The Non PAS rack gives alot more feel and feedback than the PAS set up...
The whole setup saves weight and lack of PAS pump frees up some HP/Revs
16V cup racers use a similar set up
Lots of people ask about this conversion so its about time i write a guide to save answering the same question over and over ;)

Parts needed

Non PAS rack



Non PAS Column (it is longer as the rack sits lower... see picture)



Altenator bracket
Altenator Tensioner
Altenator belt 6rib 810





The Rack and column can be taken from any Mk1 Clio with Non PAS

The brackets can be taken from....

R19 with the F3P / RSi shape engine with no PAS
R5 GTX or Monaco 1.7
Volvo 440 /480 fitted with the F3P shape enigne with no PAS
Some Meganes irrc

Renault Part numbers

7700718613 Plated tensioner bracket - ?
8200031832 Altenator Holder bracket - £44.17 net VAT
7703101094 Altenator long bolt - £3.90 net VAT
7703101073 block bolts x3 - £1.56 net VAT

[Evogone]

In the second pic you have the rack bolted to the PAS rack brackets, Should a non PAS rack be bolted directly to the subframe, without the brackets ?

[Winston]

Bolts direct to the subframe... not sure why i left that bracket on but i was pretty much a newb back than lol

[schakal]

Only the same money grabbing shite on here tbh

northy says "track days aint cheap yall" :D


anyway you will come back on your knees mate .
they all do/did