Willy 3 Decal

[darkfibre]

I'm (potentially) so fcukin happy!!!!!!!! :D

[Wobba]

right i have e mailed them regarding the sizes which are as follows

original

rear tailgate WILLIAMS decal = 150mm wide x 32mm high x 1
side arch WILLIAMS decal = 166mm wide x 36mm high x 2
side number 3 = 21mm wide x 36mm high x 2
rear number 3 = 20mm wide x 33mm high x1

there sticker sizes are as follows


rear tailgate WILLIAMS decal = 131 1/2 mm wide x 27 1/2 mm high x 1
side arch WILLIAMS decal = 144 1/2 mm wide x 30mm high x 2
side number 3 = 30mm wide x 22 1/2 mm high x 2
rear number 3 = 20mm wide x 22mm high x1

and i have asked them if they can make them up to proper size. as the colours are quiet a close match....

Aew these the same for willy1 sticker sizes?

[MatrixGuy]

ive mailed them the dimensions and some pictures of what they should look like..

heres the reply

Thank you for your mail concerning the williams decals, The
measurements and colours we have are based on a Williams clio calling in at our
shop one day two years ago, we took the measurements and colours from this, so
in all honesty they are an exact match to that particular car, however, i do
appreciate your time in mailing, and i will happily try and make you a set with
your required specs from the sizes and pics you have supplied, I will be away
today and thursday on business but i shall sit on friday and design to your
specs, and i will be happy to send you a free set so that you can compare them
to your originals, I hope this is acceptable.

Kind Regards
Jason Bounds
UK
Decals

this could be good!!! :D :D

Nice one, that's nice of them!! Sound like a good company to me!

[FATBOY]

i guess they are???? if someone could get some dimensions from there car, then we could make sure these are spot on too...

[MatrixGuy]

Well i only have the rear sticker so someone else will have to provide measurements of the arch decal?

[darkfibre]

I'll try and get some for tomorrow.

[FATBOY]

well can anyone on here get confirmation on the williams 1 decals? and the same goes for the williams 2 as well (including the "2")

[MatrixGuy]

I will post up measurments for the rear williams 2 decal tommorrow lunch.

[Wobba]

well can anyone on here get confirmation on the williams 1 decals? and the same goes for the williams 2 as well (including the "2")

I'll try and confirm this later, at work at mo...

[MatrixGuy]

god damn, was too busy to measure at lunch. will try and do it tonight or tommorrow morning if possible.

Iain