Updated Cam Cover Gaskets!

[hill_power_clio]

Right!

Following several requests from different people we are now at a stage to start selling these uprated gaskets.

They are an exact copy of the OEM item and as per the uprated inlet gaskets I produce are cut using a C02 lazer bed.
They are also made from the same PTFE material which doesn't fail when in contact with oil/petrol like the standard items.
Also they aren't affecting by over vibration caused by high revving and unsilenced exhausts etc.

Due to these properties they will also be reuseable - a good wipe down to get a good clean seal again and all should be fine...

The gasket has been trialled by 16v_paddy off the forum - he has tested for leaking - both outside and inside edges and results show nothing seaping at all. Happy Days!

Heres some pictures - apologies for the poor quality - taken from a camera phone...







Now obviously I have a lot of wasted material to deal with here as it has to be made in one piece of PTFE. However costs aren't as high as initially expected (£50).

Actual cost is £35 via paypal including delivery and packaging.
If you purchase this along with a full inlet set (manifold and t.body) then I will do an all-in-one combined price of £60.

Bearing in mind you will spend probably what £20 on a standard item from Renault (or slightly less £12 plus postage from ebay) at least one more time in the ownership of your valver/williams this is evidently a cleaner, more reliable and more investable alternative.

If you would like to order one please drop me a PM so we can sort out payment and address details.

Cheers :D

[rob-legend]

do these need the little bit cutting out to fit properly like the OE ones?

[Wobba]

do these need the little bit cutting out to fit properly like the OE ones?

Looking at it, I don't think so. I know the bit you mean.

[16v_paddy]

do these need the little bit cutting out to fit properly like the OE ones?

Looking at it, I don't think so. I know the bit you mean.

I don't know which bit you mean

[hill_power_clio]

i dont know either but paddy has fitted them without problem so I guess they are bang on!

[Laine_16v]

Make some PTFE sump gaskets ftw?

[DaneC]

I don't know which bit you mean

Bit at the pulley end.

[bbaazz-08]

from pictures ...looks like it curves around that bit

[cliokiz]

I'll probably be investing in a couple of these soon.

Group buy? :D

[16v_paddy]

Maybe it fits fine because the gasket it was copied from wasn't from renault, it was in the head gasket set I got from stan