Open to offers Williams + 16v parts much cheapness!

[Coggi]

Please make any offer on these parts! They all must go or they will go to the scrap yard in the sky!!!!


Open to offers on all these parts, either PM me or ring me or text me on 07792920716 or email me on mattcoggins@hotmail.com



Some of the parts are big (Subframes gearboxes ect so not interested in posting.... Parts located in Wakefield West Yorkshire near Leeds



So here it goes, selling these as I had them on Clio 16valver but no offers! Ive no longer got a clio so need to get these bits moved. Dont make me take them to the tip!!!


Williams bottom end, the guy said it was rebuilt before i got and it looks pretty new with new core plugs and stuff. To be honest it looks pretty new and just run in. He also said that it had high compression pistons but im not sure.



Williams bottom end, the guy said it was rebuilt before i got and it looks pretty new with new core plugs and stuff. To be honest it looks pretty new and just run in. He also said that it had high compression pistons but im not sure. Im happy to send pictures!



















The tag says that its a 1.8 but it got the proper 92.1mm stroke (I think its 92.1 i can check and take a picture withe a ruler down there if you want)

Williams head, with standard cams, there is a small bit of the cam missing at the end where i think you lock the cam into possition?







Williams front subframe with both arms, roll bar and hubs. This frame is the black one at the back and it been through a wall or something but all the bits are there to wide track a car.... arms and stuff are strait!





Williams front subframe with both arms, roll bar, hubs, discs and callipers will need sandblasting or wire brushing and a tin of hammerite but it is triple skinned.









Williams drive shafts with good boots





Rear beam complete with brakes apart from on rear calliper, its in the back of this picture, I also have a 16v rear beam




Pair of CAT cams with pullies. I think they are rally ones.





















The cams say 55020 13 on the end of them....

ENGINE information

◄
5502213
►
INTAKE EXHAUST


clearance [cl] 0.00mm 0.00mm
duration [0.1mm+cl] 286° 278°
duration [1.0mm+cl] 246° 238°
valve lift [cl=0] 10.65mm 10.20mm REQUIRED PARTS
cam lift - -
peak angle 110° 110° followers: O.E.M.
timing [1.0mm+cl] 13/53° 49/ 9° retainers: O.E.M.
lift at TDC [cl=0] 2.50mm 1.95mm


They are a Rally & Cross cam, so Big Power!

I got this off Cat Cams website

Chipped 16valve ECU








4 Pot brakes and MASSIVE discs. Hi Spec calipers, i think that they will fit under 17 inch wheels. They just need bolts to screw the disc to the disc bell.














Front 16valve bumper in blue not bad nick but will need a paint

Rear 16 valve bumper in blue same again, may want a lick of paint to be mint

Pair of blue front wings and arch liners, please treat all panels as second hand and will have scratches on

Various doors in blue.



Clio 16 Valve bonnet with vent in

Blue bootlid

4 16 valve alloys, the five spoke ones with center caps, some are blue and some are green! No tyres

Renaukt 5 turbo gearbox, unknown condition but it looks ok!









Clio 16valve front subframe complete with arms, anti rollbar, hubs, brakes and driveshafts.

16valve dash top



3 prima racing 17 inch alloys, one has a dint in it







As I said, make any offer on these parts through either email, PM, 07792920716.



Cheers Matt



Cliorod has bought parts of me before and was happy with the coilovers he got a few months ago

[LEIGH-ANNE]

Sorry all items must be priced I'm afraid

[Wolfie]

Hi Mate,

price me up on the 16v bonnet (if free of dents) and the cams (if for williams), i'll pick up if price is right as not too far away.

Cheers

Grahame

[katbloke]

dont suppose youre anywhere near devon lol, i want a willy subframe (STILL)

[Allan]

Can tell people read....

It says right at the top

Parts located in Wakefield West Yorkshire near Leeds

[katbloke]

Can tell people read....

It says right at the top

Parts located in Wakefield West Yorkshire near Leeds

Doh, scroll button can be mt worst enemy, still price posted to devon would be nice

[FQ200turbo]

how much for the F7P bottom end ?

[340R]

Cams still available?
Adam

[Coggi]

All sold.

Thanks