Alloy Wheel Centre Bore Alterations

[Coops]

Right i have a set of 59.1mm centre bore wheels i need to enlarge to 60.1mm.

as its such a small overbore, 0.5mm all round, would i get away with sandpaper/a dremel and a steady hand

if not then can someone recommend a service/business to get this done for me in Derby or Machester areas?

thanks

Ben

[Rudders16v]

I had exactly the same problem a couple of weeks ago, I used a very fine metal file and then some sand paper, car seemed to drive fine with the wheels fitted with no noticable wobbles etc!

I was working on steel wheels by the way, not alloys

[rob-legend]

what's going on the dub? :D

[rob-legend]

or on the clio (can't remember which bore is which)

[Justin..]

60.1 is the clio

[Winston]

harsh flap wheel should do the trick

[Coops]

sound, i'll pikie it then