fuel lines

[summeh]

I need to get some new fuel lines to run from my engine to just under the chassis... was thinking braided.

Can anyone list the specs of the normal hoses, i.e. fitment, inner bore etc?

Hoping to get push fit connectors as per original equipment.

would be helpful, cheers.

[richy]

iirc the inner bore size was 8mm for the fuel lines

[Laine_16v]

Inner diameter is 8mm, im 100% on that.

[MAXIBOY]

high pressure 8mm hose..

[summeh]

any ideas on the fittings lads?

cheers for pipe info

[MAXIBOY]

what do you mean push fit connectors..original had use once hose clamps..

[summeh]

ok well on the 182 it has a push fit connector that can go on and off as many times as u like.

the interface oin the fuel rail is the same.

[richy]

is it for the 182 then?

[summeh]

nope its for the williams. I thought they had the same push fit connectors, but the interface on the fuel rails are both the same, i.e. a lip. so im sure you can get the connectors and it will work.

[richy]

cant remember them being the same tbh but im sure you could buy some fittings somewere if need, or pos use some off a 182 but ditch the std hose