Megane F7R & most parts to rebuild it

[16v_paddy]

Time to get rid of my meggy lump as I'm not rebuilding it any more.




I didn't take any pics of the rest of the bits but I've got the whole engine minus a few nuts & bolts that had to be destroyed to remove them also got 2 meggy ecu's and a meggy loom
I've had the bores and the crank measured, the bores are standard size and the crank doesn't need a regrind. The guy who measured it for me estimates the mileage to be around the 80-100k mark.

I'll throw the engine stand as well £250 ono

Now the rebuild bits, I bought all of this stuff from stan @ APD, so not cheap & nasty shite

F7R head gasket set £50 ono


Bottom end gasket set £50 ono


head bolts £50 ono


crank main bearings £50 ono
big end bearings £60 ono


thrust washers £30


Wossner forged low compression pistons £350 ono

[Tanks]

Stop being a pansy paddy and turbo the naples.

[16v_paddy]

can't be bothered with mine any more :( besides I'm getting rid so I can buy that yellow valver with the itb'd 172 lump, a 350bhp pulsar or an integra type r

[Justin..]

sell me the wossner sticker lol

[donsrno1]

an integra type r

Good choice!

or alternatively you buy the yellow clio and I'll then swap with you for my DC2

[16v_paddy]

sell me the wossner sticker lol

£350 for the sticker & the pistons come for free

PM me your address & I'll post it

This is the teg I want http://www.pistonheads.co.uk/sales/976107.htm

[treishu]

hello there. do you still have the old pistons? the 2.0 litre ones?

[16v_paddy]

hello there. do you still have the old pistons? the 2.0 litre ones?

replied to your thread on C16v

[Neal 19 16v]

What thickness is the large oil seal in the BE set? 8mm or 12mm?

[16v_paddy]

What thickness is the large oil seal in the BE set? 8mm or 12mm?

Couldn't tell you mate tbh but the 2 gasket sets and the head bolts are now sold