400bhp Mr2 Turbo....********NOW SOLD*********

[skipp123]

Hi guys bit of a long shot, i used to come on here alot back in the day but never brought a clio insted went into jap performance... i now have the following for sale

please follow link for full ebay add.

Mr2 Turbo Rev4 Anniversary Edition 400bhp on eBay, also, Toyota, Cars, Cars, Parts Vehicles (end time 21-Apr-09 10:45:00 BST)

Here we have for sale my Mr2 Turbo Rev4 Anniversary Edition.

Please note before I go on.. I feel the price to reflect the condition and spec of this car.

This mr2 has some very rare parts installed including a new fully forged engine, standalone power fc ecu, Power Enterprise PE1919 turbo with IHI internals, Pheonix Power side mount intercooler {best you can buy} just to name a few bits, its also currently being fitted with a new exedy super single clutch and flywheel kit, new Toyota radiator and coolent, new brakes all round, oil service and generall inspection carried out at 3s.. If you want a jaw dropping mr2 turbo ready to go running around 400bhp this is the one for you. If you crave more power a gt3071 and remap would raise the bhp to see around 480+bhp I personally feel its set up perfect to be a fast rd/track car as have a look at the suspension spec it speaks for its self, doesnt have any issues playing with the likes of 996's 360's e46 m3's and most fairly tuned motors around.

Reason for sale?...................As much as it pains me to do this, Australian citizenship is just too tempting.

ENGINE
Power Enterprise Turbo PE1919 rare as rocking hose poo will flow 410@1.5bar
Phoenix Power Intercooler and hard pipes rare as rocking hose poo
Greedy Type S dump valve
Full Samco Hose kit
Blitz Air Filter
P.P Departure 2 Exhaust
Blitz Decat
Apexi Power Fc ECU mapped by Ryan @ 2bar
Rouge Systems Engine Fans
HKS 1.2mm Head Gasket
HKS Kevlar Cam Belt
APR Head Bolts
APR Flywheel Bolts
APR Main Studs
Cleveite Big end Bearings
Cleveite Main Bearings
Cleveite Thrust Bearings
Eagle H Beam Conrods
CP Forged Pistons 86.25mm
Fensport Blue Oil Catch Tank
Painted Rocker cover in custom purple marble
All built at 3service centre

PUMPS, GASKETS {genuine Toyota} AND OILS replaced within 5000miles max
Oil filter
Fuel Filter
Tensioner bearing
Idler bearing
Oil pressure switch
Rocker cover gasket
Rev4 gasket set
Distributor cap 5mm leads
Rotor arm
Water Pump
Oil Pump
Alternator belt
Aircon belt

FUELING
Precision Engineering 880’cc injectors brand new
Wolfkatz Top Feed Fuel Rail polished brand new
Walbro 255 Fuel Pump

SUSPENSION & DRIVETRAIN
Exedy Super Single Clutch and flywheel

Standard Rev4 Gearbox
Cusco Front Strut Bar
Cusco Rear Strut Bar
Polished standard engine brace
Front Lower Tension Arm Brace
Tein Flex Coilovers with separate oil res
TOMs Pillow ball Tension rods Front
TOMs Pillow ball Tension rods Rear
Urethene Engine Mounts
Urethene Gearbox Mounts
Urethene Suspension Bush Kit

WHEELS & TYRES
GENUINE!!! BBS LM 2 piece split rims Referbed black centres polished lip
17x8 Front
17x9.5 Rear
Goodyear eagle F1's
Front 215/40/17
Rear 245/40/17
Gram Pro 40g lightweight wheel nuts

EXTERIOR
TOMS side skirts
TOMS rear bumper
TOMS rear wing
Bomex Front Splitter
Front number plate holes filled and smoothed
Crystal Clear indicators and side lights
Small Jap style rear number plate

INTERIOR……
S2000 start button
Recaro SPG fixed race seats
4 point fixed harnesses
Reverse glow dials 180mph
Innovate Wideband AFR
TRD quick shift
TRD gearnob
Blitz boost controller SBC -ID III mounted in heater vent

The car has x4 differant boost setting mapped on the road by ryan @ 2bartuning they are set to
1.0 bar for driving round town
1.15 bar
1.3 bar
1.5 bar this will churn out around 400bhp fly in this setting

BUT..... Please note this is not for the faint hearted it is a potential death trap for someone new to rwd and large amounts of power. For this reason amongst others you will need to provide a fully comprehensive certificate of motor insurance if you want to test drive the car.

I have never had the car timed but should see these figures with a decent driver.
0-60 4.3
1/4 mile mid to late 11's

Brief description of the car in my ownership.

I purchased this originally form a very well known and respected member on imoc.co.uk by the name of Bry with 49k on the clock for 9k, He had done a fantastic job building pretty much my perfect mr2, I felt at time of purchase the only thing the car really needed was a fully forged bottom end which the gods granted me 3 months after buying :P. as stated the car now has 4k covered on the new forged engine but only 2k being on boost, total milage on the chasie is 62k. This mr2 is only just been compleeted and is fully future proofed for BIG power

Now in august driving home from jae the block decided to shit a piston ring so it was off to 3service centre for a full rebuild but not before purchasing over £1800 of performance parts from tbdevelopments and over £800 of genuine gaskets filters ect from JeffD {flashmetal} to go into the build. The engine build was started late October/beginning of November 07. Completed December 07 and collected from 3service centre to commence running in beginning of Jan 08.

Mid January 08, after completing the half the run in procedure {500 miles} I was back at 3service centre to have a general over hall, make sure the builds all perfect all belts are nice and tight change oil and general check over.

The full run in was completed in February 08 and same procedure as above carried out, only this time I was off to Surrey Rolling Road to have the final tune done by Ryan @ 2bartuning, All seemed fine the old girl knocked out 300bhp at a bar with no ignition played with so seemed like it was going to make nice power, Ryan started the higher boost stages and that’s when we found a problem, seemed injector no3 wasn’t firing enough fuel so aborted the run and was told not to use boost until problem resolved.

March 08 3service centre replaced the faulty sard 800’s with new shiny top feed wolfkatz fuel rail and precision 880’’ injectors then was mapped properly on the road by Ryan again.

All completed I enjoyed the car for a few months have to say there was no problems at all once the fuelling and final map were finished and loved pissing off the local porches/Ferraris Astons ect, but then on xmas day 08 the clutch and flywheel went {couldn’t get into gear}, so again off to 3service centre for new exedy clutch/flywheel new oil, new coolant, new rad, and general look over to make sure all is 100% for new owner. You can view the car at 3s until Saturday 18/4/09 then will be viewable around the Stansted Airport area. As you can see there has been no expense spared on this build there’s over 20k in receipts and for the condition and spec you would be hard pushed to find a better example.

The car will be sold with 12 months mot and 6 months tax, and has just had new excedy clutch and flywheel kit fitted along with a brand new radiator new coolent, new oil filter/oil, replace brake pads all round and a general look over and made sure everything 100% for new potential owner.

Im pretty sure when i say you will not find a better spec'd mr2 turbo in this colour combo in rev4+ for the money im after....

please feel free to have a look at following web sites and links for engine builder/mapper/parts guys so you can see for your selves only best parts used from the most knowlageable mr2 tuners

Engine Built 3s service centre IMOC Affiliated Company of the year 2008 www.imoc.co.uk :: Log in
All servicing and parts installed by James @ 3s Please feel free to contact him and ask hes opinion on the car.
Performance parts discussed in lenght with Tim @ tbdevelopments and supplied by him also. TB Developments
Toyota Parts supplied by JeffD @ Flashmetal.com
Mapped by Ryan @ 2Bartuning.com

PLEASE NO PX OFFERS CASH ON COLLECTION ONLY AND NO TEST DRIVES WITHOUT VALID INSURANCE CERTIFICATE

Feel free to email me or call me on 07985304971.

[rob-legend]

nice car and impressive spec, good luck with the sale!

[bill.]

WOW! the most stunning mr2 i have ever seen, and what a spec.

[skipp123]

Price is £11k

[bill.]

out of my budget then

[skipp123]

now £10,500

protection detail done over the weekend and finaly finished today