Page 4 of 4 FirstFirst ... 234
Results 31 to 40 of 40
  1. #31
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    this is rear mate :D

  2. #32
    Forum User schakal's Avatar
    Join Date
    Oct 2006
    Location
    * Uncle Schakal * knitted by nanas since 1995 , now available with added GSOH
    Posts
    4,467
    Quote Originally Posted by MAXIBOY
    this is rear mate :D

  3. #33
    Forum User
    Join Date
    Mar 2006
    Location
    Lancashire
    Posts
    1,181
    I have been quoted £150 plus vat ,each for these any diameter.I will have to take one of my spares as a sample for the splines,exact length etc etc.
    Anyone wanting further info,please get in touch.

    When you consider,about 5 years ago I got hold of a brand new REAR anti roll bar ( Grp "A" book) through my Renault agents ~~ It cost me £140 plus vat then Just for the bar,I then had to make the mountings etc etc.
    Rod

  4. #34
    J o n
    Guest
    lose the torsion bar and go full coilovers, pretty sure kits are available to do this

  5. #35
    Quote Originally Posted by cliorod
    I have been quoted £150 plus vat ,each for these any diameter.I will have to take one of my spares as a sample for the splines,exact length etc etc.
    Anyone wanting further info,please get in touch.

    When you consider,about 5 years ago I got hold of a brand new REAR anti roll bar ( Grp "A" book) through my Renault agents ~~ It cost me £140 plus vat then Just for the bar,I then had to make the mountings etc etc.
    Rod
    What diam do you run Rod ?

  6. #36
    Forum User stan's Avatar
    Join Date
    Feb 2005
    Location
    Carlise/Swansea
    Posts
    3,230
    Quote Originally Posted by TheJesus
    lose the torsion bar and go full coilovers, pretty sure kits are available to do this
    Alot of class regs dont allow this.

    Mine dont: "original suspension type must be retained".

  7. #37
    Forum User
    Join Date
    Mar 2006
    Location
    Lancashire
    Posts
    1,181
    What diam do you run Rod ?
    Steve,
    To be honest,I have not checked .It uses a proper Gp "A" ish beam ~~ from the Irish car.I thought if those lads have got it set up for the Irish lanes,it will be ok for Mull and the like.I will check for you,next time I put in on axle stands etc.

  8. #38
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    please do mate..

    i assume 23.2mm but may be 24.5mm..

    get it on stands soon..

  9. #39
    Forum User Woznaldo's Avatar
    Join Date
    Aug 2008
    Location
    Canberra, Australia
    Posts
    8
    Good Evening All, sorry to bring up an old thread, but what are the lengths of these bars and how many splines at each end? I'm actually researching for an R5 GT Turbo, but as alluded to above, fitment is the same.

    Woz

  10. #40
    Forum User Woznaldo's Avatar
    Join Date
    Aug 2008
    Location
    Canberra, Australia
    Posts
    8
    Quote Originally Posted by Woznaldo View Post
    Good Evening All, sorry to bring up an old thread, but what are the lengths of these bars and how many splines at each end? I'm actually researching for an R5 GT Turbo, but as alluded to above, fitment is the same.

    Woz
    I've currently got my GTT Rear Beam off the car and have modded it to accept 172 stub axles and brake caliper mounts. I also removed the torsion bars and I'm now looking for upgrade options noting all of the above. I've taken the length measurements, that will be the same as the Clio 16V/Williams and got:

    Torsion Bar - 595mm
    Anti-Roll Bar - 507mm

    If anyone has anything drastically different I'll be surprised. I'll post again in 2022!


 

Similar Threads

  1. Cup racer rear beam - Uprated torson bars
    By Evogone in forum Items for Sale
    Replies: 8
    Last Post: 13-06-2012, 21:36
  2. 172 or 182 uprated brakes
    By Greg_99 in forum Mechanical
    Replies: 1
    Last Post: 18-06-2008, 18:33
  3. uprated clutch
    By lewis_willy2 in forum Mechanical
    Replies: 6
    Last Post: 04-11-2007, 17:57
  4. gsf uprated clutch
    By jay s in forum Mechanical
    Replies: 29
    Last Post: 04-10-2007, 00:23
  5. uprated altenator
    By thelynx in forum Mechanical
    Replies: 4
    Last Post: 21-07-2007, 18:01

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •