Megane F7R(710) Thermal Intake Gasket

[hill_power_clio]

Hi All;

Following the success of the Valver/Williams inlet manifold gaskets I have produced (from requests) a Megane F7R (710) Thermal Intake Gasket for the head to manifold.

All the info about these gaskets can be found around the forums and the last clio 'for sale' thread can be found here:

http://www.williamsclio.co.uk/forum/...ic.php?t=28738

The gasket will be a 3mm item and will be £25 posted - this is a direct OEM swap. The gasket has been tested for fitment by 16v_paddy of this forum for me so thanks to him for that.

For those of you who haven't read up about them before - they aren't affecting by high vibration, fuel, oil, etc so will out last the std item and also are reuseable. Furthermore due to the properties of PTFE the manifold itself stays cooler allowing inlet temps to decrease.

I am looking to design the throttle body gasket soon so that will be available as a set should anybody want one (again in 3mm).

Any questions let me know and drop me a PM to order the gasket.

Thanks :D

[hill_power_clio]

BUMP

Throttle Body Gasket being drawn up at the moment as well