Time to get rid of my meggy lump as I'm not rebuilding it any more.
I didn't take any pics of the rest of the bits but I've got the whole engine minus a few nuts & bolts that had to be destroyed to remove them and the ecu
I've had the bores and the crank measured, the bores are standard size and the crank doesn't need a regrind. The guy who measured it for me estimates the mileage to be around the 80-100k mark.
I'll throw the engine stand as well £250 ono
Now the rebuild bits, I bought all of this stuff from stan @ APD, so not cheap & nasty shite
F7R head gasket set £50 ono
Bottom end gasket set £50 ono
head bolts £50 ono
crank main bearings £50 ono
big end bearings £60 ono
thrust washers £30
Wossner forged low compression pistons £350 ono
Forged H-beam Con Rods & ARP bolts - Standard F7R big end shells needed to fit these as they have the tabs £250 ono