has any one had these the 4pot ones and had any problems with them as my disc wint fit over the hubs
cheers
has any one had these the 4pot ones and had any problems with them as my disc wint fit over the hubs
cheers
I have the NON 4 pot brake kit.. The one which uses std calipers, that is 285 and went over the hubs fine. I would assume that they would use the same discs?
Matt
I would say you have the wrong discs as I had that big brake kit and it went on fine and dandy.
ok cheers lads i sure i ordered the right ones they must have cocked up wouldnt b the 1st time they have lol, ill have to get hold of them
cheers
They sent me the wrong discs first time - the holes to the hub didnt match up but they were 99% correct. Seems odd they sent you discs which were that far wrong.... Your not doing somehting silly are you?
no m8 def i messured the hole in the middle up againts the org disc and ther 3mm smaller then the org 1s and the bolt holes r slightly out. and tryed other hubs still no good.
the discs are meant to be off a Renault 21 2.0 non-turbo. 285mm, chassis L48Y I think