KTR FAST ROAD FRONT BRAKE KIT

[rob_887]

Theses come off a Mk1 1.2 R reg. But I believe they will fit the whole mk1 Range from 1.2 to RSI
They are used but i checked the disks over and they have no Marks / Indents in them at all.
The Pads have around 1.5 CM of pad.

[rob_887]

[BristolSam16v]

price? also the one on the left looks like the middle bit is higher than the middle bit on the right disc :S

[stevie_b]

I think that is probably a pic off the K-tec site? The one on the right is a vented front, 259mm probably, whilst the one on the left is then 238mm rear, non-vented?

[stevie_b]

Actually, looking again...

One on the left does not look right to be a Mk 1 Clio rear either (nowhere for the bearing to mount into), but it does look non-vented and so is completely different to the one on the right!

[Justin..]

Its just a promo pic of off K-tiec's site. The left disc is solid, the right is vented.

[katbloke]

plus they are fronts so you wouldnt have anywhere for bearing to press into

[rob_887]

Oppps. The ones i'm selling are two solid fronts.

[rob_887]

So to comfirm theses are the Solid Type that will fit 1.1, 1.2, 1.4