Had a visit this morning

[Allan]

From the powerflex Fairy :D

Delivered me some polly bush's :D

Part codes incase anyone wants them
Anti rollbar outer
Williams - PFF60-207-22
Valver -PFF60-205
Totaly different as most will know

Anti rollbar Inner
Williams - PFF60-202-23
Valver - PFF60-202-20
Williams ARB has bigger hole in the bush 23mm to the valvers 20mm

Dogbone mount
Both PFF60-206K Identical

Wishbones
Williams - PFF60-301
Valver - PFF60-201
The same design but the williams ones are slightly larger then the valver ones by a few mm.
See ppictures below, then williams bush is bigger then the valver metal sleave.

Also looking at the sleaves my valver ones are the new shorter items and the williams ones i have came with longer sleaves









Williams (left) valver (right)

Williams (left) valver (right)


Valver bush on williams bush


Valver metal selve on the williams bush

[northy]

can u fit the sleeve and take another picture mate ?

[Allan]

Not great pics from my camera phone but here they are

Williams ones
No gap it does come flush with the top of the mount though



Valver ones, with the valver one you can see there is about a 1mm gap at the bottom (not fully pushed on)

[Wobba]

Nice one mate! Get cracking with it, but dont miss tomorrow at pod! I have your brakes here and I am not doing strip runs with them loading me down ^^

[Coops]

they should all be the shorter sleeve to let the bush protrude a bit, a wc correction to the original design iirc, but powerflex are still selling the old type

williams are 5mm bigger sleeves and bushes on the wishbones, 45mm to valvers 40mm

[Allan]

Not to worry wobba will be there ;)

I wont be fitting these tonight, have to do the dimma first, its up in the air at the moment while i fit the new brakes :D
So dont worry i will put the stuff in my boot so you can do your runs :D have a cat for you to take back to summeh though

[LEIGH-ANNE]

see u tmora bout 3-4ish then allan :D

[Allan]

Aye i will do hun, you or wobba giving adam a lift?

I have a car of 4 so should be nice and fun with tents and extra crap lol :D Dimma brakes now fitted too :D

so just the bush's to sort now

[Daz.]

how worse would the ride be with these fitted do you think?

[Allan]

hmm well i had a go in wobba's this weekend, it definatly turns in better and corners flatter, but im not sure the ride is any more harsh just a little harder.