As a first question, does anybody know if you can use the 2 litre engine found in the Volvo 460 as a basis for a 2 litre 16v engine. I know its a Renault engine but I dont know if it will all fit together with a 16v head.
I'm only asking as i'm currently building a hybrid gearbox using a 16v bellhousing and diff (with uprated bearings) and a Volvo 440 end case and gears. I'm putting uprated bearings into this,and i'm just making a pattern up to have some uprated selector forks cast and machined.
Total cost at the minute is £15 and will be £60 to have the selectors cast & machined. Hopefully it'll be a bit stronger.
See ya
Matt