decals

[Wobba]

go with what titch says if not laquered on

Just checked, they are lacquered on :(

[katbloke]

trouble is whole lot will be laquered so any attempt to sand out or anything will leave an un-laquered area

[drsmith1979]

you can either get the arches redone... or...

check your new decals with your old ones while they are on the car, if they are the same size and spacing, you can get away with cutting the old ones out and replacing with the new ones... personally i would seal them with a light coat of lacquer to stop water getting under the paint etc.. but this will do the trick

[Wobba]

I hate messing with bodywork stuff, I dont have a good place to do work as I have no garage and I dont like the idea of cutting up bodypaint! Think I'll just leave it for now.

[drsmith1979]

lol after all the hard work you did on an engine? a rattle can scaring you off lol

[Daz.]

If it was just on top of the paint you really don't need a knife - if its a cold day a bit of heat wouldn't go amiss but don't go ott or you could pull off more than you want!

Wobba whats wrong with them at the moment? if they're where they need to be then I guess for now you could stick some decals over the existing provided they were lined up perfectly and no-one would know

[northy]

you maybe able to polish the area and through the lacquer