Tracking Query

[Greg_99]

Getting two new tyres fitted on the front this weekend and thought it may be a good idea to get the tracking looked at and adjusted. Is there anything i need to inform the garage, are they the same settings as the 16v or as it's wide track do i need to make sure they have the specific Williams figures?

[MAXIBOY]

think you need williams figures...not sure if they differ from the 16v though

[white16valver]

I think they do.

www.alignmycar.co.uk have proper 4-wheel tracking things and have all the different settings on the computer, as well as giving you a full before and after print of camber, toe, and castor too, I think.

About £40 but not too bad really.

It may be worth seeing if someone (edde?) on ClioSport has posted them up at some stage though - I'm sure I've had a different setup the last two times I've been. Think I was toe in at first but now I'm toe out

Need some clarity on this! lol

[Lunner]

Last chart i saw in a garage 16v and williams were listed with the same toe in

[Wobba]

Just make sure they can actually DO the tracking first...place I went to past week started crying like a bunch of girls that my track rod ends were seized. Dont they know they are sposed to be seized on a Renault? Noobs.

[Lunner]

Most places find my car is too low, had it bodged my a friendly garage last time, but do need to get it set properly, tramlines to ****

[jay s]

williams and valvers have a different tracking setup, due to the wider front track and different camber settings.

[Purple]

Williams clio front toe setting range (per wheel) is:-

0degree 05minutes to 0degree 15minutes

So, 10 minutes per wheel would be about perfect.

[white16valver]

Thanks purple.

I'll have to dig out my printouts to see what I'm supposed to be running at the moment, although I may not bother if I'm going to get my tie rod ends done...