Dashligh bulb kits

[McPikie]

OK, seen a few of these on Ebay. As one of my bulbs have gone, I have decided to change the lot from ornage to blue as my car is white.

Are they just twist in jobs, or soldered on?

Also, is there any films to cut/replace, or is it just a case of changing bulbs?

Lastly, anyone done this and got pics??

Cheers guys

[jamie]

Im after some new dash bulbs as mine have going, my garage replaced the bulbes but the lights on the dials still did not work?? Anyone got any ideas why this could be?

[McPikie]

Im after some new dash bulbs as mine have going, my garage replaced the bulbes but the lights on the dials still did not work?? Anyone got any ideas why this could be?

Daft question, but you tried the dimmer dial??

[white16valver]

Fuses?

[McPikie]

Anyways, back on topic

Are they a pain to fit?

[bass_direct]

i've done this before..

the bulbs are just twist in ones, i bought mine from ebay years ago!

you have to remove faces and sand down the back of them (to remove orange colour filter)..

you will also need to remove each needle and sand the back of them down. (phase 1's have orange needles, phase 2 have white needles)

this is a pic of mine -

[McPikie]

That's exactly what am after



So, is the clockset easy enough to remove? Speedo cable and that

[bass_direct]

the clockset is very easy to remove.. doing all the bits is tricky, personally i'd buy a spare set and do it on them incase you break it!

[Allan]

t509's i think the bulbs are, some of the valver ones come with clear plastic as i have a spare one and the backing pastic parts are clear and not orange as on my williams

[jamie]

What do u mean all this sanding business could that be anything to do with why my garage could not get mine to work???