After a chip remapped for cams

[JonnyK]

http://www.perfectpower.com/products/smt6.asp

that is what i have, there are 5 (i think) wires that get spliced into the original loom, right near the ECU, looks quite simple, but as far as I am aware I dont know anyone else who maps it apart from Andy @ GDI,

i would sell it for 150.. pm me

[teabag]

how much was SMT6 new? and is it easy to use?

[105epwr]

I dunno if it helps but I have a smt6 Piggyback ECU, that is remapped for cams and headwork.. if you fitted that you could use my mapping as a kinda "base map" then pay andy at GDI around £100 (if i remember correctly) for a remap?

pmd mate,Gdi is 20 mins away so thats all good :D

[rs27carrera]

Can you rise rev limiter with SMT6?

How about free modification of fuel and ignition maps. If all that can be done, SMT6 sounds like perfect product

[J o n]

I dunno if it helps but I have a smt6 Piggyback ECU, that is remapped for cams and headwork.. if you fitted that you could use my mapping as a kinda "base map" then pay andy at GDI around £100 (if i remember correctly) for a remap?

pmd mate,Gdi is 20 mins away so thats all good :D

Just be careful you dont end up at the ranch down the road. Keep a lookout for a chinese kid in a cowboy hat.

[105epwr]

I dunno if it helps but I have a smt6 Piggyback ECU, that is remapped for cams and headwork.. if you fitted that you could use my mapping as a kinda "base map" then pay andy at GDI around £100 (if i remember correctly) for a remap?

pmd mate,Gdi is 20 mins away so thats all good :D

Just be careful you dont end up at the ranch down the road. Keep a lookout for a chinese kid in a cowboy hat.

im sure ive just past the little bastard!