What torque wrench?

[Slithers]

Need a tourque wrench thats ideally suited for working around clios, but i need summit that i can get a fair bit of leverage on and it needs to be on a 1/2 inch drive.

Any recommendations?

P.S

Its gonna be me b'day pressie from the family so dont be stingy on budgets, lol

[Rich]

halfords ones are good enough mate! (the pro ones) lifetime guarentee too ;)

[Slithers]

halfords ones are good enough mate! (the pro ones) lifetime guarentee too ;)

Dont like halfords tools mate, the chrome finish they put on their stuff is not too good IMO, seemed to come of way too easy on my halfords pro spanner set.

Have to say my tendancies are leaning towards snap-on tools.

[Rich]

well in that case snap on or teng mate ;)

[Slithers]

well in that case snap on or teng mate ;)

TENG!!!!!, that was the fukkin firm i was tryna think of.

[richy]

halfords ones are good enough mate! (the pro ones) lifetime guarentee too ;)

Dont like halfords tools mate, the chrome finish they put on their stuff is not too good IMO, seemed to come of way too easy on my halfords pro spanner set.

Have to say my tendancies are leaning towards snap-on tools.

u want cheap but snap on u taking the mickey !! i have snap on stuff but wont buy no more because there prices are rediculous!! ive started buying halfords pro, or teng etc etc just as good on most tools but half the price!

[Lunner]

I've got a 1/2" drive draper one, goes form about 30Nm to about 210, does everythign i've wnated it to do,and is about 500/600 mm long, only thing i couldn't do wiht it was the front hub bolts, they had to be 250Nm, bt just tightened to 210 and then a bit futher wiht breaker bar

[KingStromba]

I have a phillips screwdriver :P

[northy]

go to machine mart mate...clarke do a good one and its not too expensive.

Mine has been going for years now.

[Rich]

well in that case snap on or teng mate ;)

TENG!!!!!, that was the fukkin firm i was tryna think of.

there you go then problem solved :D